thfu
/
TailCorr
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

z芯片在环验证 

v04-delete unnecessary .m files

v04-spi ram delete unnecessary ports and add related .m

v04-z_chip_top modify and DataShow.m comparing case
This commit is contained in:
thfu 2024-11-23 22:05:06 +08:00 committed by futh0403
parent 5433610d48
commit 22ceafb511
20 changed files with 2082 additions and 336 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

47
script_m/DataShow.m Normal file
View File

@ -0,0 +1,47 @@
clc;clear
%conver case from bin2dec
DataOrg_bin = textread("/home/thfu/work/Z-noSFQ/EZQ-Z-M-v1.0/case/TC_SingleWaveCombine_bin.txt",'%s');
DataOrg_dec = bin2dec(DataOrg_bin);
DataOrg_hex = string(dec2hex(DataOrg_dec,8));
DataRead_hex = upper(string(textread("/home/thfu/work/Z-noSFQ/EZQ-Z-M-v1.0/FIL/sim/ConfigData.dat",'%s')));
%%
%read data
clc;clear;close all
dout0 = importdata("/home/thfu/work/Z-noSFQ/EZQ-Z-M-v1.0/FIL/sim/dout0.dat")-32768;
dout1 = importdata("/home/thfu/work/Z-noSFQ/EZQ-Z-M-v1.0/FIL/sim/dout1.dat")-32768;
dout2 = importdata("/home/thfu/work/Z-noSFQ/EZQ-Z-M-v1.0/FIL/sim/dout2.dat")-32768;
dout3 = importdata("/home/thfu/work/Z-noSFQ/EZQ-Z-M-v1.0/FIL/sim/dout3.dat")-32768;
en = importdata("/home/thfu/work/Z-noSFQ/EZQ-Z-M-v1.0/FIL/sim/en.dat" ) ;
N_all = length(dout0);
cs_wave_all(1:4:4*N_all) = dout0;
cs_wave_all(2:4:4*N_all) = dout1;
cs_wave_all(3:4:4*N_all) = dout2;
cs_wave_all(4:4:4*N_all) = dout3;
start_indices = find(en(1:end-1) == 0 & en(2:end) == 1) + 1; %point from 0 to 1
end_indices = find(en(1:end-1) == 1 & en(2:end) == 0);
figure()
for i = 1:length(start_indices)
N = end_indices(i) - start_indices(i) + 1;
cs_wave{i}(1:4:4*N) = dout0(start_indices(i):end_indices(i));
cs_wave{i}(2:4:4*N) = dout1(start_indices(i):end_indices(i));
cs_wave{i}(3:4:4*N) = dout2(start_indices(i):end_indices(i));
cs_wave{i}(4:4:4*N) = dout3(start_indices(i):end_indices(i));
subplot(20,5,i);
plot(cs_wave{i});
end
% signalAnalyzer(cs_wave_all,'SampleRate',1);
%%
N = 31; % length of data
fs = 1;
fe = 0.3; % center frequency
D = 1;
nfft = 32;
[y,freq]=exzfft_ma(cs_wave_split{1},fe,fs,nfft,D);
figure(1)
plot(freq,abs(y))

6
script_m/MeanIntp.m
View File

@ -1,6 +0,0 @@
%%% so means original, s_mean means mean value
function [s,s_mean] = MeanIntp(s,s_r1)
s_mean = (s+s_r1)/2;
end

35
script_m/MyIIR.m
View File

@ -1,35 +0,0 @@
function out = MyIIR(a,b,x,YStartState,sel_double)
len = length(x);
switch sel_double
case 0
x = int64(x);
a = int64(a);
b = int64(b);
y(1) = int64(YStartState);
case 1
x = double(x);
a = double(a);
b = double(b);
y(1) = double(YStartState);
end
switch sel_double
case 0
for i = 1:len-1
y_tmp(i+1) = a*x(i+1) - b*y(i)';
y(i+1) = bitsra(y_tmp(i+1),20) + bitget(y_tmp(i+1),64);
end
out = bitsra(y,16);
case 1
for i = 1:len-1
y_tmp(i+1) = floor(a*x(i+1) - b*y(i)');
y(i+1) = floor(y_tmp(i+1)/2^20) + bitget(int64(y_tmp(i+1)),64);
end
out = floor(y/2^16);
end

31
script_m/MyIIR_test.m
View File

@ -1,31 +0,0 @@
clc;clear;close all
%%%verification of single IIR Filter by comparing matlab and verilog
cd('/data/work/thfu/TailCorr/script_m');
a = 13740916;
b = -1047703;
y(1) = 0;
sel_double = 0;
switch sel_double
case 0
iir_in = int64(importdata("/home/thfu/work/TailCorr/v02/sim/in") -32768);
iir_out = int64(importdata("/home/thfu/work/TailCorr/v02/sim/out") -32768);
case 1
iir_in = double(importdata("/home/thfu/work/TailCorr/v02/sim/in") -32768);
iir_out = double(importdata("/home/thfu/work/TailCorr/v02/sim/out") -32768);
end
Script_out = MyIIR(a,b,iir_in,y(1),sel_double)';
y_revised = iir_in + Script_out;
tau = finddelay(y_revised,iir_out);
Script_outPhi = cat(1,zeros(1,tau)',Script_out(1:end-tau,1));
n = 1:length(iir_in);
diff = iir_out(n)-Script_outPhi(n);
diff_plot(iir_out, Script_outPhi)
tau

45
script_m/PolyMean_Test.m
View File

@ -1,45 +0,0 @@
%%%verification of polyphase structures using trig
clc;clear all;close all
fs = 1e8;
t = (0:1:1e2)'/fs;
% f = 20e6;
% s = sin(2*pi*f*t);
s = triang(1e2-1);
s = [zeros(1,10) s' zeros(1,10)]';
N = length(s);
ts = (0:1:N-1)'/fs;
%%%
s_r1 = [0 s(1:end-1,1)']';
[s2,s2_mean] = MeanIntp(s,s_r1);
s_intp2 = zeros(2*N,1);
s_intp2(1:2:2*N) = s2_mean;
s_intp2(2:2:2*N) = s2;
t_intp2 = (0:1:2*N-1)'/fs/2;
%%%
s2_r1 = [0 s2(1:end-1,1)']';
[s4_4,s4_3] = MeanIntp(s2,s2_mean);
[s4_2,s4_1] = MeanIntp(s2_mean,s2_r1);
s_intp4 = zeros(4*N,1);
s_intp4(1:4:4*N) = s4_1;
s_intp4(2:4:4*N) = s4_2;
s_intp4(3:4:4*N) = s4_3;
s_intp4(4:4:4*N) = s4_4;
t_intp4 = (0:1:4*N-1)'/fs/4;
figure('Units','normalized','Position',[0.000390625,0.517361111111111,0.49921875,0.422916666666667]);
plot(ts,s,t_intp2,s_intp2)
grid on
% xlim([0.58 0.62]*1e-6)
%
%
figure('Units','normalized','Position',[0.500390625,0.517361111111111,0.49921875,0.422916666666667]);
plot(t_intp4,s_intp4)
grid on
% xlim([0.58 0.62]*1e-6)

27
script_m/TailCorr.m
View File

@ -1,27 +0,0 @@
function out = TailCorr(alpha,beta,iir_in,YStartState,sel_double)
len = length(iir_in);
N = length(alpha);
iir_inR1 = cat(1,0,iir_in(1:end-1,1));
diff = iir_in - iir_inR1;
Ystart = YStartState;
for i = 1:1:N
y(1:len,i) = MyIIR(alpha(i),beta(i),diff,Ystart,sel_double);
y = floor(y);
end
switch sel_double
case 0
y_sum = int64(sum(y,2));
case 1
y_sum = double(sum(y,2));
end
out = iir_in+y_sum;

63
script_m/TailCorr_8inpt_test.m
View File

@ -1,63 +0,0 @@
%%%2024-10-15
%%%verification 8 linear interpolation result by comparing matlab and verilog result
clc;clear;close all
cd('/data/work/thfu/TailCorr/script_m');
sel_double = 0;
switch sel_double
case 0
iir_in_verilog = int64(importdata("/home/thfu/work/TailCorr/sim/in.dat") - 32768);
% iir_out_x1 = int64(importdata("/home/thfu/work/TailCorr/sim/X1_data.dat") -32768);
% iir_out_x2 = int64(importdata("/home/thfu/work/TailCorr/sim/X2_data.dat") -32768);
% iir_out_x4 = int64(importdata("/home/thfu/work/TailCorr/sim/X4_data.dat") -32768);
iir_out_verilog_x8 = int64(importdata("/home/thfu/work/TailCorr/sim/X8_data.dat") -32768);
case 1
iir_in = double(importdata("/home/thfu/work/TailCorr/sim/in") + 0);
iir_out_x1 = double(importdata("/home/thfu/work/TailCorr/sim/X1_data.dat") - 32768);
iir_out_x2 = double(importdata("/home/thfu/work/TailCorr/sim/X2_data.dat") - 32768);
iir_out_x4 = double(importdata("/home/thfu/work/TailCorr/sim/X4_data.dat") - 32768);
iir_out_x8 = double(importdata("/home/thfu/work/TailCorr/sim/X8_data.dat") - 32768);
end
% iir_out_x1 = [iir_out_x1' zeros(1,2)]';
% iir_out_x2 = [iir_out_x2' zeros(1,3)]';
% iir_out_x4 = [iir_out_x4' zeros(1,6)]';
alpha = [1757225200, 1045400392, 13740916];
beta = -[1042856 1046395 1047703];
Ystart = 0;
y_revised_matlab = TailCorr(alpha,beta,iir_in_verilog,Ystart,sel_double);
N = length(y_revised_matlab);
x1 = (1:1:N)';
x8 = (1:1/8:N+1-1/8)';
y_revised_intp8_matlab = int64(interp1(x1,double(y_revised_matlab),x8,'linear'));
%%%
%tau0 = finddelay(y_revised_matlab,iir_out_x1);
%y_revisedPhi0 = cat(1,zeros(1,tau0)',y_revised_matlab(1:end-tau0,1));
%figure('Units','normalized','Position',[0.500390625,0.517361111111111,0.49921875,0.422916666666667]);
%diff_plot(iir_out_x1, y_revisedPhi0,'verdi','matlab',[200 N]);
%%%
%tau2 = finddelay(s_intp2,iir_out_x2);
%y_revisedPhi2 = cat(1,zeros(1,tau2)',s_intp2(1:end-tau2,1));
%figure('Units','normalized','Position',[0.500390625,0.517361111111111,0.49921875,0.422916666666667]);
%diff_plot(iir_out_x2, y_revisedPhi2,'verdi','matlab',[0 4e4])
%%%
%tau4 = finddelay(s_intp4,iir_out_x4);
%y_revisedPhi4 = cat(1,zeros(1,tau4)',s_intp4(1:end-tau4,1));
%figure('Units','normalized','Position',[0.000390625,0.034027777777778,0.49921875,0.422916666666667]);
%diff_plot(iir_out_x4, y_revisedPhi4,'verdi','matlab',[0 8e4])
%%%
tau8 = finddelay(y_revised_intp8_matlab,iir_out_verilog_x8);
y_revisedPhi8 = cat(1,zeros(1,tau8)',y_revised_intp8_matlab(1:end-tau8,1));
figure('Units','normalized','Position',[0.000390625,0.517361111111111,0.49921875,0.422916666666667]);
diff_plot(iir_out_verilog_x8, y_revisedPhi8,'verdi','matlab',[400 800]);

17
script_m/TailCorr_IP_Test.m
View File

@ -1,4 +1,4 @@
%2024-11-09-verify IIR IP core
%in+iir_out with 8 intp
clc;clear;close all
in = importdata("/home/thfu/work/TailCorr/sim/in.dat");
@ -35,26 +35,27 @@ wave_float_8 = interp1(1:wave_float_len,wave_float,1:1/8:(wave_float_len+1-1/8),
[cs_wave_A,wave_float_8_A,Delay] = alignsignals(cs_wave,wave_float_8);
N = min(length(wave_float_8_A),length(cs_wave_A));
figure(2)
figure()
diff_plot(wave_float_8_A(90:end), cs_wave_A(154:end),'float','verdi',[0 N]);
%%
%Test of iir filter
[wave_float_A,wave_verdi_A,Delay] = alignsignals(wave_float,wave_verdi);
N = min(length(wave_float_A),length(wave_verdi_A));
figure(1)git sh
figure()
diff_plot(wave_float_A, wave_verdi_A,'float','verdi',[0 N]);
%%
signalAnalyzer(wave_float,wave_verdi,'SampleRate',1);
%%
fprintf("a is %.10f\n",a)
fprintf("b is %.10f\n",b)
%%
a_fix = round(a*2^31);
b_fix = round(b*2^31);
dec2hex(a_fix,8)
dec2hex(b_fix,8)
a_hex = dec2hex(a_fix,8);
b_hex = dec2hex(b_fix,8);
% dec2bin(a_fix,32)
% dec2bin(b_fix,32)
a_bin = dec2bin(a_fix,32);
b_bin = dec2bin(b_fix,32);

27
script_m/TailCorr_test.m
View File

@ -1,27 +0,0 @@
clc;clear;close all
cd('/data/work/thfu/TailCorr/script_m');
sel_double = 1;
switch sel_double
case 0
iir_in = int64(importdata("/home/thfu/work/TailCorr/v02/sim/in") -32768);
iir_out = int64(importdata("/home/thfu/work/TailCorr/v02/sim/out") -32768);
case 1
iir_in = double(importdata("/home/thfu/work/TailCorr/v02/sim/in") -32768);
iir_out = double(importdata("/home/thfu/work/TailCorr/v02/sim/out") -32768);
end
alpha = [1757225200, 1045400392, 13740916];
beta = -[1042856 1046395 1047703];
Ystart = 0;
y_revised = TailCorr(alpha,beta,iir_in,Ystart,sel_double);
tau = finddelay(y_revised,iir_out);
y_revisedPhi = cat(1,zeros(1,tau)',y_revised(1:end-tau,1));
diff_plot(iir_out, y_revisedPhi,'verdi','matlab',[0 1e4])

73
script_m/TailCorr_test_P.m
View File

@ -1,73 +0,0 @@
%%%20241009,comparing matlab and verilog result
clc;clear;close all
cd('/data/work/thfu/TailCorr/script_m');
sel_double = 1;
switch sel_double
case 0
iir_in = int64(importdata("/home/thfu/work/TailCorr/Test/sim/in") -32768);
iir_out_x1 = int64(importdata("/home/thfu/work/TailCorr/Test/sim/X1_data.dat") -32768);
iir_out_x2 = int64(importdata("/home/thfu/work/TailCorr/Test/sim/X2_data.dat") -32768);
iir_out_x4 = int64(importdata("/home/thfu/work/TailCorr/Test/sim/X4_data.dat") -32768);
case 1
iir_in = double(importdata("/home/thfu/work/TailCorr/Test/sim/in") + 0);
iir_out_x1 = double(importdata("/home/thfu/work/TailCorr/Test/sim/X1_data.dat") - 32768);
iir_out_x2 = double(importdata("/home/thfu/work/TailCorr/Test/sim/X2_data.dat") - 32768);
iir_out_x4 = double(importdata("/home/thfu/work/TailCorr/Test/sim/X4_data.dat") - 32768);
end
% iir_out_x1 = [iir_out_x1' zeros(1,2)]';
% iir_out_x2 = [iir_out_x2' zeros(1,3)]';
% iir_out_x4 = [iir_out_x4' zeros(1,6)]';
alpha = [1757225200, 1045400392, 13740916];
beta = -[1042856 1046395 1047703];
Ystart = 0;
y_revised = TailCorr(alpha,beta,iir_in,Ystart,sel_double);
s = round(y_revised);
N = length(s);
s_r1 = [0 s(1:end-1,1)']';
[s2,s2_mean] = MeanIntp(s,s_r1);
s2 = floor(s2);
s2_mean = floor(s2_mean);
s2_r1 = [0 s2(1:end-1,1)']';
[s4_4,s4_3] = MeanIntp(s2,s2_mean);
[s4_2,s4_1] = MeanIntp(s2_mean,s2_r1);
s4_1 = floor(s4_1);
s4_2 = floor(s4_2);
s4_3 = floor(s4_3);
s4_4 = floor(s4_4);
s_intp2 = zeros(2*N,1);
s_intp2(1:2:2*N) = s2_mean;
s_intp2(2:2:2*N) = s2;
s_intp4 = zeros(4*N,1);
s_intp4(1:4:4*N) = s4_1;
s_intp4(2:4:4*N) = s4_2;
s_intp4(3:4:4*N) = s4_3;
s_intp4(4:4:4*N) = s4_4;
%%%
tau1 = finddelay(y_revised,iir_out_x1);
y_revisedPhi1 = cat(1,zeros(1,tau1)',y_revised(1:end-tau1,1));
figure('Units','normalized','Position',[0.000390625,0.517361111111111,0.49921875,0.422916666666667]);
diff_plot(iir_out_x1, y_revisedPhi1,'verdi','matlab',[0 2e4])
tau2 = finddelay(s_intp2,iir_out_x2);
y_revisedPhi2 = cat(1,zeros(1,tau2)',s_intp2(1:end-tau2,1));
figure('Units','normalized','Position',[0.500390625,0.517361111111111,0.49921875,0.422916666666667]);
diff_plot(iir_out_x2, y_revisedPhi2,'verdi','matlab',[0 4e4])
tau4 = finddelay(s_intp4,iir_out_x4);
y_revisedPhi4 = cat(1,zeros(1,tau4)',s_intp4(1:end-tau4,1));
figure('Units','normalized','Position',[0.000390625,0.034027777777778,0.49921875,0.422916666666667]);
diff_plot(iir_out_x4, y_revisedPhi4,'verdi','matlab',[0 8e4])

24
script_m/exzfft_ma.m Normal file
View File

@ -0,0 +1,24 @@
function [y,freq,c]=exzfft_ma(x,fe,fs,nfft,D)
nt=length(x); % ¼ÆËãÁÈëÊý¾Ý³¤È
fi=fe-fs/D/2; % ¼ÆËãϸ»¯½ØֹƵÂÊÏÂÏÞ
fa=fi+fs/D; % ¼ÆËãϸ»¯½ØֹƵÂÊÉÏÏÞ
na=round(0.5 * nt/D+1); % È·¨µÍͨÂ˲¨Æ÷½ØֹƵÂÊÔÓ¦µÄÆ×ÏßÌõÊý
% ƵÒÆ
n=0: nt-1; % ÐòÁÐË÷ÒýºÅ
b=n*pi* (fi+fa)/fs; % ÉèÖõ¥Î»ÐýתÒò×Ó
y=x.*exp(-1i*b); % ½øÐÐƵÒÆ
b= fft(y, nt); % FFT
% µÍͨÂ˲¨ºÍϲÉÑù
a(1: na) =b(1: na); % È¡ÕýƵÂʲ¿·ÖµÄµÍƵ³É·Ö
a(nt-na+2 : nt) =b(nt-na+2 : nt); % È¡¸ºÆµÂʲ¿·ÖµÄµÍƵ³É·Ö
b=ifft(a, nt); % IFFT
c=b(1 : D: nt); % ϲÉÑù
% Çóϸ»¯ÆµÆ×
y=fft(c, nfft) * 2/nfft;% ÔÙÒ»´ÎFFT
y=fftshift(y); % ÖØÐÂÅÅÁÐ
freq=fi+(0:nfft-1)*fs/D/nfft; % ƵÂÊÉèÖÃ
figure
plot(freq,20*log10(y))
grid on

21
script_m/intp8_Test.m
View File

@ -1,21 +0,0 @@
%%%2024-10-17,verify 8 intp by comparing matlab and verilog
clc;clear all;close all;
in = importdata("/home/thfu/work/TailCorr/sim/in_intp8.dat");
intp8_verilog = importdata("/home/thfu/work/TailCorr/sim/out_intp8.dat");
N = length(in);
time = 1:1:N;
time8 = 1:1/8:N+1-1/8;
intp8_matlab = floor(interp1(time,in,time8,'linear'))';
%figure
%plot(time,in);
%hold on
%plot(time8,intp8_verilog);
%xlim([4500 5500])
tau8 = finddelay(intp8_matlab(1.8e4:3e4),intp8_verilog(1.8e4:3e4));
intp8_matlab_revised = cat(1,zeros(1,tau8)',intp8_matlab(1:end-tau8,1));
figure('Units','normalized','Position',[0.000390625,0.517361111111111,0.49921875,0.422916666666667]);
diff_plot(intp8_verilog, intp8_matlab_revised,'verdi','matlab',[2e4 2.2e4]);

172
spi_tx_rx/rx/rx_sram.v Normal file
View File

@ -0,0 +1,172 @@
// Relese History
// Version Date Author Description
// 0.2 2024-06-14 ZYZ
//-----------------------------------------------------------------------------------------------------------------
// Keywords : receive data from spi_master,sent data to PC
// set reset to output Rdata_PC
//-----------------------------------------------------------------------------------------------------------------
// Parameter
//
//-----------------------------------------------------------------------------------------------------------------
// Purpose :
//
//-----------------------------------------------------------------------------------------------------------------
// Target Device:
// Tool versions:
//-----------------------------------------------------------------------------------------------------------------
// Reuse Issues
// Reset Strategy:
// Clock Domains:
// Critical Timing:
// Asynchronous I/F:
// Synthesizable (y/n):
// Other:
//-FHDR--------------------------------------------------------------------------------------------------------
module rx_sram(
input clk,
input rstn,
(* mark_debug="true" *) input [31:0] din ,
(* mark_debug="true" *) input din_vld ,
(* mark_debug="true" *) input data_rden_rx,
(* mark_debug="true" *) output [31:0] Rdata_PC
);
parameter width = 32 ;
parameter depth = 65536 ;
//=================================================
function integer clog2(input integer depth);
begin
for(clog2=0;depth>0;clog2=clog2+1)
depth =depth>>1;
end
endfunction
//=================================================
localparam aw = clog2(depth-1);
//=================================================
//wr&rd address
(* mark_debug="true" *) reg [aw-1:0] cnta ;
(* mark_debug="true" *) reg [aw-1:0] cntb ;
(* mark_debug="true" *) reg ena ;
(* mark_debug="true" *) reg enb ;
(* mark_debug="true" *) wire [31:0] doutb ;
(* mark_debug="true" *) reg [31:0] din_reg;
always @(posedge clk or negedge rstn)
begin
if(!rstn ) begin
din_reg <= 1'b0;
end
else begin
din_reg <= din;
end
end
(* mark_debug="true" *) reg data_rden_rx_reg;
always @(posedge clk or negedge rstn)
begin
if(!rstn) begin
data_rden_rx_reg <= 1'b0 ;
end
else begin
data_rden_rx_reg <= data_rden_rx ;
end
end
//addra addrb
always @(posedge clk or negedge rstn)
begin
if(!rstn) begin
cnta <= 'h0 ;
end
else if(ena) begin
cnta <= cnta + 'b1;
end
else
cnta <= cnta ;
end
always @(posedge clk or negedge rstn)
begin
if(!rstn ) begin
cntb <= 'h0;
end
else if(enb) begin
cntb <= cntb + 'b1;
end
else begin
cntb <= cntb;
end
end
//enable
always @(posedge clk or negedge rstn)
begin
if(!rstn ) begin
ena <= 1'b0;
end
else begin
ena <= din_vld;
end
end
always @(posedge clk or negedge rstn)
begin
if(!rstn) begin
enb <= 1'b0 ;
end
else if(data_rden_rx_reg & (cntb <= cnta - 1'b1))begin
enb <= 1'b1 ;
end
else begin
enb <= 1'b0 ;
end
end
reg [31:0] Rdata_PC_reg;
always @(posedge clk or negedge rstn)
begin
if(!rstn ) begin
Rdata_PC_reg <= 32'b0;
end
else begin
Rdata_PC_reg <= doutb;
end
end
assign Rdata_PC = Rdata_PC_reg;
/*
blk_mem_gen_0 blk_mem_gen_0_inst(
.clka(clk),
.ena(1'b1),
.wea(ena),
.dina(Rdata_reg),
.addra(cnta),
.clkb(clk),
.enb(enb),
.doutb(doutb),
.addrb(cntb)
);
*/
spram_model #(
.width(width),
.depth(depth)
)spram_inst(
.clka(clk),
.ena(~ena),
.dina(din_reg),
.addra(cnta),
.clkb(clk),
.enb(~enb),
.doutb(doutb),
.addrb(cntb)
);
endmodule

219
spi_tx_rx/spi_master/AxiSpi.v Normal file
View File

@ -0,0 +1,219 @@
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 2024/04/03 15:36:03
// Design Name:
// Module Name: AxiSpi
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module AxiSpi(
input clk,
input reset,
input WR, // write en
input RD, // read en
//input [7 : 0] Wlength, // д³¤È
//input [7 : 0] Rlength, // Á³¤È
input [31 : 0] WADDR, // дµØÖ·
input [31 : 0] RADDR, // ÁµØÖ·
(* KEEP="TRUE"*) input [31 : 0] DIN,
input WVALID, // дÊý¾ÝµÄvalid
input cmd_s, // Ö¡¸ñʽ¿ØÖÆ×Ö
input [4 : 0] chirpID,
input [31 : 0] Nlen,
(* KEEP="TRUE"*) output WREADY, // ¿ÉÒÔдÊý
(* KEEP="TRUE"*) output RREADY, // ¿ÉÒÔÁÊý
// read data from spi slave, need to send to axi
(* KEEP="TRUE"*) output RVALID,
(* KEEP="TRUE"*) output [31 : 0] RDATA,
// interface to spi slave
input spi_slave_bit,
(* KEEP="TRUE"*) output ss,
(* KEEP="TRUE"*) output spi_clk,
(* KEEP="TRUE"*) output spi_master_bit
);
// ÎÞÂÛÁд¼ÒªÍ¨¹ýдspi slave µÄ·½Ê½£¬Ö»ÊÇдµÄÖ¸Áͬ
//axi_slave_mem axi_slave_mem_u(
// .clk1(sys_clk), // write clk
// .reset(!sys_rst_n),
// .WR(WR1),
// .RD(1'b0),
// .ADDR_WR(ADDR_WR),
// .ADDR_RD(ADDR_RD),
// .DIN(DIN),
// .cmd_s(1'b0),
// .DVALID(DVALID1),
// .DOUT(DOUT1),
// .ValidRange(ValidRange1)
// );
//axi_slave_mem axi_slave_mem_u2( // Á
// .clk1(sys_clk), // write clk
// // .clk2(sys_clk), // read clk
// .reset(!sys_rst_n),
// .WR(WR2),
// .RD(1'b1),
// .ADDR_WR(ADDR_WR2),
// .ADDR_RD(ADDR_WR2),
// .DIN(DIN2),
// .cmd_s(1'b0),
// .DVALID(DVALID2),
// .DOUT(DOUT2),
// .ValidRange(ValidRange2)
//);
reg WR_c; // Á»¹ÊÇдµÄÑ¡Ôñ
always@(posedge clk)
begin
if(reset)
begin
WR_c <= 1'b0;
end
else if(WR_c == 1'b0) // д״̬ÏÂÖ±µ½ÁÖ¸Áîµ½À´ÔÙ·´×ª
begin
if(RD)
WR_c <= 1'b1;
end
else // Á״̬ÏÂÖ±µ½Ð´Ö¸Áîµ½À´ÔÙ·´×ª
begin
if(WR)
WR_c <= 1'b0;
end
end
// ÓÉÓÚWR_cµÄÔ­Òò£¬ËùÓÐÊäÈë¼ÒªºóÑÓÒ»¸öclk²ÅÄܺÍWR_cÔÆë
reg WR_r;
reg RD_r;
reg [31 : 0] WADDR_r;
reg [31 : 0] RADDR_r;
reg [31 : 0] DIN_r;
reg cmd_sr;
always@(posedge clk)
begin
if(reset)
begin
WADDR_r <= 32'b0;
RADDR_r <= 32'b0;
DIN_r <= 32'b0;
cmd_sr <= 1'b0;
WR_r <= 1'b0;
RD_r <= 1'b0;
end
else
begin
WADDR_r <= WADDR;
RADDR_r <= RADDR;
DIN_r <= DIN ;
cmd_sr <= cmd_s;
WR_r <= WR;
RD_r <= RD;
end
end
wire DVALID;
wire [7 : 0] DOUT;
wire ValidRange;
wire [31 : 0] data_spi_32;
wire WR_mem;
assign WR_mem = WR_r || RD_r; // ÎÞÂÛÁ»¹ÊÇд£¬¼ÐèÒªÁд
axi_slave_mem axi_slave_mem_u( // µØÖ·Ö»»á¸øÊ×µØÖ·£¬ºóÃæÐèÒª×Ô¼º²¹ÉÏ£¬»òÕßÏÈ°´Ã¿´ÎÖ»·¢Ò»Ö¡Ð´
.clk1(clk), // write clk
.reset(reset),
.WR(WR_mem), //WR_r
.RD(WR_c),
.ADDR_WR(WADDR_r),
.ADDR_RD(RADDR_r),
.DIN(DIN_r),
.cmd_s(cmd_sr),
.chirpID(chirpID),
.Nlen(Nlen),
.DVALID(DVALID),
.DOUT(DOUT),
.ValidRange(ValidRange),
.data_spi_32(data_spi_32)
);
wire [7 : 0] spi_master_byte;
wire spi_master_valid;
//wire miso;
spi_master spi_master_u(
// control signal
.clk(clk),
.reset(reset),
//// TX(MOSI) signal
.Rx_ready(~ValidRange), // ÐèÒªÁдspiʱÖÃ1
.axi_byte(DOUT),
.axi_valid(DVALID),
.ss(ss), // ƬѡÐźÅ
.spi_master_bit(spi_master_bit),
.spi_clk(spi_clk),
// RX(MISO) signal
.spi_slave_bit(spi_slave_bit),
.spi_master_byte(spi_master_byte),
.spi_master_valid(spi_master_valid)
// SPI Interface
);
spi_master_mem spi_master_mem_u( // ¼ÓÒ»¸öreadyÐźţ¬±íʾ¿ÉÒÔÁд£¨spi´«Êýʱ²»ÄÜÁд£©
.clk(clk),
.reset(reset),
.RD(WR_c), // axi
.ADDR_RD(RADDR_r), // axi
.DIN(spi_master_byte), // spi
.DVALID(spi_master_valid), // spi
.cmd_s(cmd_s),
.chirpID(chirpID),
.Nlen(Nlen),
.data_spi_32(data_spi_32),
.DREADY(~ss),
.DOUT(RDATA),
.DVALID_o(RVALID)
);
reg ss_r1;
reg ss_r2;
always@(negedge clk)
begin
if(reset)
begin
ss_r1 <= 1'b0;
ss_r2 <= 1'b0;
end
else
begin
ss_r1 <= ss;
ss_r2 <= ss_r1;
end
end
assign WREADY = ss_r2 && ss_r1 && ss;
assign RREADY = ~(ss_r2 && ss_r1 && ss);
endmodule

371
spi_tx_rx/spi_master/axi_slave_mem.v Normal file
View File

@ -0,0 +1,371 @@
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 2024/03/25 16:00:22
// Design Name:
// Module Name: axi_slave_mem
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module axi_slave_mem(
clk1, // write clk
// clk2, // read clk
reset,
WR,
RD,
ADDR_WR,
ADDR_RD,
DIN,
cmd_s,
chirpID,
Nlen, // ÿһ֡Êý¾ÝµÄ³¤È
DVALID,
DOUT,
ValidRange,
data_spi_32
);
parameter MEM_WORDS = 10000;
input clk1;
input reset;
input WR;
input RD;
input [31:0] ADDR_WR;
input [31:0] ADDR_RD;
input [31:0] DIN;
input cmd_s;
input [4 :0] chirpID;
input [31:0] Nlen;
output DVALID;
output [7:0] DOUT;
output ValidRange;
output [31 : 0] data_spi_32;
reg [32-1:0] Mem_data [MEM_WORDS-1:0];
reg [32-1:0] Mem_addr [MEM_WORDS-1:0];
reg WR_r;
wire WR_begin;
wire WR_end;
reg [32-1:0] addr_cnt;
reg [32-1:0] DIN_r;
reg [32-1:0] ADDR_WR_r;
always @(posedge clk1)
begin
if (reset)
begin
WR_r <= 1'b0;
DIN_r <= 1'b0;
ADDR_WR_r <= 1'b0;
end
else if(RD == 1'b0) // write
begin
WR_r <= WR;
DIN_r <= DIN; // when need to write, just write the data_in in to memory
ADDR_WR_r <= ADDR_WR;
end
else // read
begin
WR_r <= WR;
DIN_r <= DIN; // when need to write, just write the data_in in to memory
ADDR_WR_r <= ADDR_RD;
end
end
assign WR_begin = WR & (~WR_r);
assign WR_end = (~WR) & (WR_r);
always @(posedge clk1)
begin
if (WR_begin)
begin
addr_cnt <= 32'b0;
end
else if(WR_r) // ´æ´¢Êý¾ÝºÍµØÖ·
begin
addr_cnt <= addr_cnt + 1'b1;
Mem_data[addr_cnt] <= DIN_r; // when need to write, just write the data_in in to memory
Mem_addr[addr_cnt] <= ADDR_WR_r;
end
end
wire [31 : 0] Length; //È·¨Ö¡³¤È
//assign Length = (cmd_s == 1'b0) ? 5'd2 : 5'd17;
assign Length = Nlen + 1'b1;
reg [6 : 0] data32_cnt; // 32bit data counter [5 : 0]--> 2·ÖƵ£»[6 : 0]--> 4·ÖƵ
reg [31 : 0] length_cnt; // 32bit data counter
always@(posedge clk1)
begin
if(reset || WR_end)
begin
data32_cnt <= 5'b0;
end
else if(length_cnt == Length)
begin
data32_cnt <= 5'b0;
end
else
begin
data32_cnt <= data32_cnt + 1'b1;
end
end
always@(posedge clk1)
begin
if(reset || WR_end)
begin
length_cnt <= 32'b0;
end
else if(data32_cnt == 7'd127) // 63--> 2·ÖƵ£»127--> 4·ÖƵ
begin
length_cnt <= length_cnt + 1'b1;
end
else if((length_cnt == Length) && (data32_cnt == 5'd0))
begin
length_cnt <= 32'b0;
end
end
reg [31 : 0] length_cnt_r;
always@(posedge clk1)
begin
if(reset || WR_end)
begin
length_cnt_r <= 32'b0;
end
else
begin
length_cnt_r <= length_cnt;
end
end
reg valid_32; // ÿ32bitÔÓ¦Ò»¸övalid
reg valid_32r;
always@(posedge clk1)
begin
if(reset || WR_end || (length_cnt == Length))
begin
valid_32 <= 1'b0;
valid_32r <= 1'b0;
end
else if(data32_cnt == 5'd1)
begin
valid_32 <= 1'b1;
valid_32r <= valid_32;
end
else
begin
valid_32 <= 1'b0;
valid_32r <= valid_32;
end
end
reg [31 : 0] data_spi_32;
reg [31 : 0] data_addr_cnt;
reg [31 : 0] data_addr;
reg [31 : 0] data_mem;
always@(posedge clk1)
begin
if(reset || WR_end || WR_begin)
begin
data_addr_cnt <= 32'b0;
data_spi_32 <= 32'b0;
data_addr <= 32'b0;
data_mem <= 32'b0;
end
else if(RD == 1'b0)
begin
if (data_addr_cnt <= addr_cnt)
begin
if((data32_cnt == 5'd0) && (length_cnt != 1'b1) && (length_cnt != Length))
begin
data_addr_cnt <= data_addr_cnt + 32'b1;
data_addr <= Mem_addr[data_addr_cnt];
data_mem <= Mem_data[data_addr_cnt];
end
if((data32_cnt == 5'd1) && (length_cnt == 1'b0)) // zhentou
begin
// data_spi_32 <= {1'b0, cmd_s,data_addr[24 : 0], 5'b0 };
data_spi_32 <= {1'b0,data_addr[24 : 0], chirpID, 1'b0 };
end
else if((data32_cnt == 5'd1)) // && (length_cnt == Length - 1)
begin
data_spi_32 <= data_mem;
end
end
else
begin
data_addr <= 32'hffff;
data_spi_32 <= 32'hffff;
end
end
else if(RD == 1'b1)
begin
if (data_addr_cnt <= addr_cnt)
begin
if((data32_cnt == 5'd0) && (length_cnt != 1'b1) && (length_cnt != Length))
begin
data_addr_cnt <= data_addr_cnt + 32'b1;
data_addr <= Mem_addr[data_addr_cnt];
end
if((data32_cnt == 5'd1) && (length_cnt == 1'b0)) // zhentou
begin
// data_spi_32 <= {1'b1, cmd_s,data_addr[24 : 0], 5'b0 };
data_spi_32 <= {1'b1,data_addr[24 : 0], chirpID, 1'b0 };
end
else if((data32_cnt == 5'd1)) // && (length_cnt == Length - 1)
begin
data_spi_32 <= 32'b0;
end
end
else
begin
data_addr <= 32'hffff;
data_spi_32 <= 32'hffff;
end
end
end
reg ss_wr;
always@(posedge clk1)
begin
if(reset || WR_begin || (data_addr_cnt > addr_cnt)) // ÔÚдʱ²»ÔÊÐí´«Êý
begin
ss_wr <= 1'b1;
end
else if ((WR_end))
begin
ss_wr <= 1'b0;
end
end
reg ss_dr;
always@(posedge clk1)
begin
if(length_cnt_r == Length) // ÿ´«ÍêÒ»Ö¡£¬ssÀ­µÍÒ»¸öclk
begin
ss_dr <= 1'b1;
end
else
begin
ss_dr <= 1'b0;
end
end
reg ss_wr1;
reg ss_wr2;
always@(posedge clk1)
begin
if(reset || (data_addr_cnt > addr_cnt))
begin
ss_wr1 <= 1'b1;
ss_wr2 <= 1'b1;
end
else
begin
ss_wr1 <= ss_wr;
ss_wr2 <= ss_wr1;
end
end
wire ss_r;
assign ss_r = ss_wr || ss_dr;
wire ValidRange_r;
assign ValidRange_r = ss_wr2 || ss_dr;
reg ss_r1;
reg ss_r2;
always@(posedge clk1)
begin
if(reset)
begin
ss_r1 <= 1'b1;
ss_r2 <= 1'b1;
end
else
begin
ss_r1 <= ValidRange_r;
ss_r2 <= ss_r1;
end
end
reg [7 : 0] data_spi; // spi data input
reg [6 : 0] data_spi_cnt; // [5 : 0]->2, [6 : 0] ->4
always @(posedge clk1)
if (ValidRange_r | reset)
begin
data_spi_cnt <= 5'b0;
end
else
begin
data_spi_cnt <= data_spi_cnt + 1'b1;
end
reg valid_spi;
always @(posedge clk1)
if (reset)
begin
data_spi <= 8'b0;
// data_spi_cnt <= 4'b0; //mutl_driven
// data_addr_cnt <= 32'b0;
valid_spi <= 1'b0;
end
else if (~ValidRange_r)
begin
if(data_spi_cnt == 4'b1)
begin
valid_spi <= 1'b1;
data_spi <= data_spi_32[31 : 24]; // ´Ó¸ßµ½µÍ·¢ËÍ
end
else if(data_spi_cnt == 7'd33)
begin
valid_spi <= 1'b1;
data_spi <= data_spi_32[23 : 16];
end
else if(data_spi_cnt == 7'd65)
begin
valid_spi <= 1'b1;
data_spi <= data_spi_32[15 : 8];
end
else if(data_spi_cnt == 7'd97)
begin
valid_spi <= 1'b1;
data_spi <= data_spi_32[7 : 0];
end
else
begin
valid_spi <= 1'b0;
end
end
else
begin
valid_spi <= 1'b0;
end
wire valid_spi_o;
assign valid_spi_o = valid_spi && (~ss_r);
assign DVALID = valid_spi_o;
assign DOUT = data_spi ;
assign ValidRange = ss_r2;
endmodule

213
spi_tx_rx/spi_master/spi_master.v Normal file
View File

@ -0,0 +1,213 @@
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 2024/06/24
// Design Name:
// Module Name: spi_master
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies: V0.2 Corresponding to the code of June 19, the spi slave side of the three-state port output
// Fixed a bug where high resistance z was sampled during the first falling edge sampling
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module spi_master
#(parameter SPI_MODE = 3)
(
// control signal
input clk,
input reset,
//// TX(MOSI) signal
input Rx_ready, // ÐèÒªÁдspiʱÖÃ1
input [7 : 0] axi_byte,
input axi_valid,
output ss, // ƬѡÐźÅ
output spi_master_bit,
output spi_clk,
// RX(MISO) signal
// output [7 : 0] RX_byte,
// output RX_valid,
input spi_slave_bit,
output [7 : 0] spi_master_byte,
output spi_master_valid
// SPI Interface
);
wire w_CPOL; // Clock polarity
wire w_CPHA; // Clock phase
assign w_CPOL = (SPI_MODE == 2) | (SPI_MODE == 3);
assign w_CPHA = (SPI_MODE == 1) | (SPI_MODE == 3);
reg Rx_ready_r1;
reg Rx_ready_r2;
always@(posedge clk)
begin
if(reset)
begin
Rx_ready_r1 <= 1'b0;
Rx_ready_r2 <= 1'b0;
end
else
begin
Rx_ready_r1 <= Rx_ready;
Rx_ready_r2 <= Rx_ready_r1;
end
end
reg spi_clk_r;
reg spi_clk_rr;
always@(posedge clk)
begin
if(reset)
begin
spi_clk_r <= 1'b1;
//spi_clk_rr <= 1'b1;
end
else
begin
if(Rx_ready)
begin
spi_clk_r <= spi_clk_r + 1'b1;
end
//spi_clk_rr <= spi_clk_r; // 2·ÖƵ
end
end
always@(posedge clk)
begin
if(reset)
begin
spi_clk_rr <= 1'b1;
end
else
begin
if(spi_clk_r == 1'b0)
spi_clk_rr <= ~spi_clk_rr; //4·ÖƵ
end
end
reg ss_r;
reg ss_rr;
wire rx_edge;
always@(negedge clk) // only ss need to read negedge of clk
begin
if(reset)
begin
ss_r <= 1'b1;
ss_rr <= ss_r;
// rx_edge_r <= 1'b0;
end
else
begin
ss_r <= ~Rx_ready;
ss_rr <= ss_r;
// rx_edge_r <= rx_edge;
end
end
wire tx_edge;
assign rx_edge = (spi_clk_r) & (~spi_clk_rr); // mode 3
assign tx_edge = (~spi_clk_r) & (spi_clk_rr);
reg rx_edge_r;
reg rx_edge_r2;
reg rx_edge_r3;
always@(posedge clk)
begin
if(reset)
begin
rx_edge_r <= 1'b0;
rx_edge_r2 <= 1'b0;
rx_edge_r3 <= 1'b0;
end
else
begin
rx_edge_r <= rx_edge;
rx_edge_r2 <= rx_edge_r;
rx_edge_r3 <= rx_edge_r2;
end
end
reg spi_master_bit_r;
//reg spi_master_bit_rr;
reg [7 : 0] spi_master_byte_r;
reg [2 : 0] bit_cnt1; // 0~7
reg [2 : 0] bit_cnt2; // 0~7
always@(posedge clk)
begin
// if(reset || (~Rx_ready))
// begin
// spi_master_bit_r <= 1'b0;
// spi_master_bit_rr <= 1'b0;
// spi_master_byte_r <= 8'b0;
// bit_cnt1 <= 3'd7;
// bit_cnt2 <= 3'd7;
// end
if(reset)
begin
spi_master_bit_r <= 1'b0;
//spi_master_bit_rr <= 1'b0;
spi_master_byte_r <= 8'b0;
bit_cnt1 <= 3'd7;
bit_cnt2 <= 3'd7;
end
else if (~Rx_ready_r1)
begin
bit_cnt1 <= 3'd7;
bit_cnt2 <= 3'd7;
end
else
begin
if(tx_edge)
begin
spi_master_bit_r <= axi_byte[bit_cnt1]; // spi_master_bit_r Ó¦¸Ã°´spi clk ø²»ÊÇ clk ±ä»¯
bit_cnt1 <= bit_cnt1 - 1'b1;
//spi_master_bit_rr <= spi_master_bit_r;
end
else if(rx_edge_r2)
begin
spi_master_byte_r[bit_cnt2] <= spi_slave_bit;
bit_cnt2 <= bit_cnt2 - 1'b1;
end
end
end
assign spi_clk = spi_clk_rr;
assign ss = ss_rr;
assign spi_master_bit = spi_master_bit_r;
assign spi_master_byte = spi_master_byte_r;
assign spi_master_valid = ((bit_cnt2 == 3'd7) && (rx_edge_r3 == 1'b1)) ? 1'b1 : 1'b0;
/*
reg spi_master_valid_reg;
always@(posedge clk)
begin
if(reset)begin
spi_master_valid_reg <= 1'b0;
end else if(spi_master_valid & Rx_ready)begin
spi_master_valid_reg <= 1'b1;
end else if(~Rx_ready)begin
spi_master_valid_reg <= 1'b0;
end
end
assign miso_valid = spi_master_valid & spi_master_valid_reg;
*/
endmodule

221
spi_tx_rx/spi_master/spi_master_mem.v Normal file
View File

@ -0,0 +1,221 @@
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 2024/03/26 15:21:07
// Design Name:
// Module Name: spi_master_mem
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////
module spi_master_mem(
clk,
reset,
RD, // axi
ADDR_RD, // axi
DIN, // spi
DVALID, // spi
cmd_s,
chirpID,
Nlen,
data_spi_32,
DREADY,
DOUT,
DVALID_o
);
parameter MEM_WORDS = 1000;
input clk;
input reset;
input RD;
input [31:0] ADDR_RD;
input [7:0] DIN;
input DVALID;
input cmd_s; // Ö¡¸ñʽ¿ØÖÆ×Ö
input [4 :0] chirpID;
input [31:0] Nlen;
input [31 :0] data_spi_32; // ×ÖÍ·
input DREADY;
output [31:0] DOUT;
output DVALID_o;
reg DREADY_r;
always @(posedge clk)
begin
if(reset)
DREADY_r <= 1'b0;
else
DREADY_r <= DREADY;
end
reg [1 : 0] valid_cnt; // valid count,ÒÔ4ΪÖÜÆÚ
reg [5 : 0] valid_cnt16; // valid count, ÒÔ16*4ΪÖÜÆÚ
reg [31 : 0] head_cnt; // Ö¡¼ÆÊý
wire [31 : 0] Length; // Ö¡³¤È
//assign Length = (cmd_s == 1'b0) ? 8'd7 : 8'd67; // 7 = 2*4 -1; 67 = 17 * 4 -1
assign Length = (Nlen + 1) * 4 - 1;
reg [31 : 0] data_32;
always @(posedge clk)
begin
if (reset || (~RD) || (~DREADY_r))
begin
valid_cnt <= 2'b0;
valid_cnt16 <= 4'b0;
data_32 <= 32'b0;
end
else if(RD && DREADY_r && DVALID)
begin
begin
valid_cnt <= valid_cnt + 1'b1;
valid_cnt16 <= valid_cnt16 + 1'b1;
end
if(valid_cnt == 2'b0)
begin
data_32 <= {DIN, data_32[23 : 0]}; // MSB
end
else if(valid_cnt == 2'd1)
begin
data_32 <= {data_32[31 : 24], DIN, data_32[15 : 0]};
end
else if(valid_cnt == 2'd2)
begin
data_32 <= {data_32[31 : 16], DIN, data_32[7 : 0]};
end
else if(valid_cnt == 2'd3)
begin
data_32 <= {data_32[31 : 8], DIN};
end
end
end
always @(posedge clk)
begin
if (reset || (~RD) || (~DREADY_r))
begin
head_cnt <= 32'b0;
end
else if(RD && DREADY_r && DVALID)
begin
if(head_cnt < Length)
begin
head_cnt <= head_cnt + 1'b1;
end
else
begin
head_cnt <= 32'b0;
end
end
end
reg DVALID_r;
always@(posedge clk)
begin
if(reset)
begin
DVALID_r <= 1'b0;
end
else
begin
DVALID_r <= DVALID;
end
end
reg [31 : 0] data_o;
reg valid_o;
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// ÓÉÓÚspi masterÄ£¿éµÄ´¦Àí£¬ÕâÀïµÄÊý¾Ý±Èaxi_slave_mem ·¢³öµÄÊý¾ÝÒªÍíһЩ£¬ÐèÒªÑÓʱÒÔÔÆë
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
reg [31 : 0] data_spi_32_r1;
reg [31 : 0] data_spi_32_r2;
reg [31 : 0] data_spi_32_r3;
reg [31 : 0] data_spi_32_r4;
reg [31 : 0] data_spi_32_r5;
reg [31 : 0] data_spi_32_r6;
reg [31 : 0] data_spi_32_r7;
reg [31 : 0] data_spi_32_r8;
always@(posedge clk)
begin
if(reset)
begin
data_spi_32_r1 <= 32'b0;
data_spi_32_r2 <= 32'b0;
data_spi_32_r3 <= 32'b0;
data_spi_32_r4 <= 32'b0;
data_spi_32_r5 <= 32'b0;
data_spi_32_r6 <= 32'b0;
data_spi_32_r7 <= 32'b0;
data_spi_32_r8 <= 32'b0;
end
else
begin
data_spi_32_r1 <= data_spi_32;
data_spi_32_r2 <= data_spi_32_r1;
data_spi_32_r3 <= data_spi_32_r2;
data_spi_32_r4 <= data_spi_32_r3;
data_spi_32_r5 <= data_spi_32_r4;
data_spi_32_r6 <= data_spi_32_r5;
data_spi_32_r7 <= data_spi_32_r6;
data_spi_32_r8 <= data_spi_32_r7;
end
end
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// spi slave ·µ»ØÊý¾ÝÔÚÖ¡Í·´¦·µ»ØÈ«Á㣬²»ÐèÑÓºóÊý¾Ý£¬ÔÚÈ«Áã´¦²ðÈëÖ¡Í·¼´¿É
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
always@(posedge clk)
begin
if(reset || (~RD) || (~DREADY_r))
begin
data_o <= 32'b0;
valid_o <= 1'b0;
end
begin
if(DVALID_r && (valid_cnt == 2'd0) && (RD) ) //&& DREADY
begin
if(head_cnt == 32'd4) // ÿ֡ǰ4¸ö×Ö½ÚÊÇÖ¡Í·
begin
data_o <= data_spi_32_r8;
valid_o <= 1'b1;
end
else
begin
data_o <= data_32;
valid_o <= 1'b1;
end
end
else
begin
valid_o <= 1'b0;
end
end
end
assign DOUT = data_o;
assign DVALID_o = valid_o;
endmodule

69
spi_tx_rx/spram_model_0.v Normal file
View File

@ -0,0 +1,69 @@
module spram_model #(
parameter width = 32
,parameter depth = 256
)(
clka,
ena,
dina,
addra,
clkb,
enb,
doutb,
addrb
);
//=================================================
function integer clog2(input integer depth);
begin
for(clog2=0;depth>0;clog2=clog2+1)
depth =depth>>1;
end
endfunction
//=================================================
localparam aw = clog2(depth-1);
//=================================================
input clka;
input ena;
input [width-1:0] dina;
input [aw-1:0] addra;
input clkb;
input enb;
output [width-1:0] doutb;
input [aw-1:0] addrb;
//================================================
wire clka;
wire ena;
wire [width-1:0] dina;
wire [aw-1:0] addra;
wire clkb;
wire enb;
reg [width-1:0] doutb;
wire [aw-1:0] addrb;
//================================================
reg [width-1:0] mem[0:depth-1];
always@(posedge clka)begin
if(!ena)begin
mem[addra] <=dina;
end
end
always@(posedge clkb)begin
if(!enb)begin
doutb <=mem[addrb];
end
else begin
doutb <=0;
end
end
endmodule

486
spi_tx_rx/top/sram_z_top.v Normal file
View File

@ -0,0 +1,486 @@
//+FHDR--------------------------------------------------------------------------------------------------------
// Company:
//-----------------------------------------------------------------------------------------------------------------
// File Name : spi_to_sram_v1.2.v
// Department :
// Author : ZYZ
// Author's Tel :
//-----------------------------------------------------------------------------------------------------------------
// Relese History
// Version Date Author Description
// 0.1 2024-05-30 ZYZ
//-----------------------------------------------------------------------------------------------------------------
// Keywords : (1) connect rx_sram , tx_sram , spi-master ,digital_top successfully,the
// verilog files of the digital_top is marked 2024.5.17
// (2) when reading data,tx_sram still need to complete the data
//
//-----------------------------------------------------------------------------------------------------------------
// Parameter
//
//-----------------------------------------------------------------------------------------------------------------
// Purpose :
//
//-----------------------------------------------------------------------------------------------------------------
// Target Device:
// Tool versions:
//-----------------------------------------------------------------------------------------------------------------
// Reuse Issues
// Reset Strategy:
// Clock Domains:
// Critical Timing:
// Asynchronous I/F:
// Synthesizable (y/n):
// Other:
//-FHDR--------------------------------------------------------------------------------------------------------
`include "../../rtl/define/chip_define.v"
module sram_z_top(
input clk
,input por_rstn
,input async_rstn // hardware Reset, active low
//sync
,input sync_in // Chip synchronization signal input, high pulse valid
,output sync_out // Chip synchronization signal output, high pulse valid
,input [1 :0] ch0_feedback // Ch0 Feedback signals from the readout chip
`ifdef CHANNEL_IS_FOUR
,input [1 :0] ch1_feedback // Ch1 Feedback signals from the readout chip
,input [1 :0] ch2_feedback // Ch2 Feedback signals from the readout chip
,input [1 :0] ch3_feedback // Ch3 Feedback signals from the readout chip
`endif
,input [4 :0] cfgid // During power-on initialization, the IO configuration
// values are read as the chip ID number
//irq
,output irq
//tx_sram port
,input [31 :0] din
,input [15 :0] data_length
,output data_done_all
,output data_out_per
,input ch0_dac_Cal_end
,input ch0_dc_Cal_end
//digital_top port
,output oen
//rx_sram port
,input data_rden_rx
,output [31:0] Rdata_PC
//------------------------------Ch0 DSP data out----------------------------------------------------
,output [15 :0] ch0_z_dsp_dout0
,output [15 :0] ch0_z_dsp_dout1
,output [15 :0] ch0_z_dsp_dout2
,output [15 :0] ch0_z_dsp_dout3
,output ch0_z_DEM_MSB_vld
);
//tx_sram signal
wire [31:0] Nlen;
wire [4 :0] chip_ID;
wire [24:0] address;
wire [31:0] data_out_rx;
wire wr_en;
wire rd_en;
wire RREADY;
wire WREADY;
//axi-spi signal
wire spi_master_bit;
wire spi_clk;
wire ss;
wire spi_slave_bit;
//rx_sram signal
wire [31:0] RDATA;
wire RVALID;
wire [14 :0] ch0_z_DEM_MSB_OUT0;
wire [14 :0] ch0_z_DEM_MSB_OUT1;
wire [14 :0] ch0_z_DEM_MSB_OUT2;
wire [14 :0] ch0_z_DEM_MSB_OUT3;
wire [6 :0] ch0_z_DEM_ISB_OUT0;
wire [6 :0] ch0_z_DEM_ISB_OUT1;
wire [6 :0] ch0_z_DEM_ISB_OUT2;
wire [6 :0] ch0_z_DEM_ISB_OUT3;
wire [8 :0] ch0_z_DEM_LSB_OUT0;
wire [8 :0] ch0_z_DEM_LSB_OUT1;
wire [8 :0] ch0_z_DEM_LSB_OUT2;
wire [8 :0] ch0_z_DEM_LSB_OUT3;
tx_sram inst_tx_sram(
.clk(clk),
.rstn(por_rstn),
//input
.dina(din),
.data_length (data_length),
.WREADY (WREADY),
.RREADY (RREADY),
//output
.Nlen (Nlen),
.chip_ID (chip_ID),
.address (address),
.data_out (data_out_rx),
.wr_en (wr_en),
.rd_en (rd_en),
.data_done_all (data_done_all),
.data_out_per (data_out_per)
);
AxiSpi inst_AxiSpi(
.clk (clk ),
.reset (!por_rstn ),
.WR (wr_en ),
.RD (rd_en ),
//input
.WADDR ({7'b0,address}),
.RADDR ({7'b0,address}),
.DIN (data_out_rx ),
.WVALID ( ),
.cmd_s ( ),
.chirpID (chip_ID ),
.Nlen (Nlen ),
//output
.WREADY (WREADY ),
.RREADY (RREADY ),
// read data from spi slave, need to send to axi
.RVALID (RVALID ),
.RDATA (RDATA ),
// interface to spi slave
.spi_slave_bit (spi_slave_bit ), //miso
.ss (ss ), //ss
.spi_clk (spi_clk ), //2 or 4
.spi_master_bit (spi_master_bit) //mosi
);
rx_sram inst_rx_sram(
.clk (clk),
.rstn (por_rstn),
.din (RDATA),
.din_vld (RVALID),
.data_rden_rx (data_rden_rx),
.Rdata_PC (Rdata_PC)
);
z_chip_top inst_chip_top (
//+++++++++++++++++++++++++++++++++++++++++++++//
// PAD Strat //
//+++++++++++++++++++++++++++++++++++++++++++++//
.PI_async_rstn (async_rstn )// hardware Reset, active low
//sync
,.PI_sync_in (sync_in ) // Chip synchronization signal input, high pulse valid
,.PO_sync_out (sync_out ) // Chip synchronization signal output, high pulse valid
//Feedback signal
,.PI_ch0_feedback (ch0_feedback)// Ch0 Feedback signals from the readout chip
`ifdef CHANNEL_IS_FOUR
,.PI_ch1_feedback (ch1_feedback) // Ch1 Feedback signals from the readout chip
,.PI_ch2_feedback (ch2_feedback) // Ch2 Feedback signals from the readout chip
,.PI_ch3_feedback (ch3_feedback) // Ch3 Feedback signals from the readout chip
`endif
//config chip id
,.PI_cfgid (cfgid)// During power-on initialization, the IO configuration
// values are read as the chip ID number
//spi port
,.PI_sclk (spi_clk ) // Spi Clock
,.PI_csn (ss ) // Spi Chip Select active low
,.PI_mosi (spi_master_bit) // Spi Mosi
,.PO_miso (spi_slave_bit ) // Spi Miso
//irq
,.PO_irq (irq )// Interrupt signal in the chip, high level active
//Attenuator Control Bit\u200c
,.PO_ch0_att ( ) // CH0 Attenuator Control Bit
`ifdef CHANNEL_IS_FOUR
,.PO_ch1_att ( ) // CH1 Attenuator Control Bit
,.PO_ch2_att ( ) // CH2 Attenuator Control Bit
,.PO_ch3_att ( ) // CH3 Attenuator Control Bit
`endif
//+++++++++++++++++++++++++++++++++++++++++++++//
// PAD End //
//+++++++++++++++++++++++++++++++++++++++++++++//
//+++++++++++++++++++++++++++++++++++++++++++++//
// PIN Strat //
//+++++++++++++++++++++++++++++++++++++++++++++//
//-------------------------clcok pin from pll-------------------------------------------------
,.clk (clk )// System Main Clock
//-------------------------Power on reset pin from por----------------------------------------
,.por_rstn (por_rstn )// Power on reset, active low
//------------------------------digital IO----------------------------------------------------
//------------------------------PLL cfg pin----------------------------------------------------
,.ref_sel ( )// Clock source selection for a frequency divider;
// 1'b0:External clock source
// 1'b1:internal phase-locked loop clock source
,.ref_en ( )// Input reference clock enable
// 1'b0:enable,1'b1:disable
,.ref_s2d_en ( )// Referenced clock differential to single-ended conversion enable
// 1'b0:enable,1'b1:disable
,.p_cnt ( ) // P counter
,.pfd_delay ( ) // PFD Dead Zone
,.pfd_dff_Set ( ) // Setting the PFD register,active high
,.pfd_dff_4and ( ) // PFD output polarity
,.spd_div ( ) // SPD Frequency Divider
,.spd_pulse_width ( ) // Pulse Width of SPD
,.spd_pulse_sw ( ) // Pulse sw of SPD
,.cpc_sel ( ) // current source selection
,.swcp_i ( ) // PTAT current switch
,.sw_ptat_r ( ) // PTAT current adjustment
//,output [1 :0] sw_fll_cpi // Phase-locked loop charge pump current
//,output sw_fll_delay // PLL Dead Zone
,.pfd_sel ( ) // PFD Loop selection
,.spd_sel ( ) // SPD Loop selection
,.dtd_en ( ) //
//,output fll_sel // FLL Loop selection
,.vco_tc ( ) // VCO temperature compensation
,.vco_tcr ( ) // VCO temperature compensation resistor
,.vco_gain_adj ( ) // VCO gain adjustment
,.vco_gain_adj_r ( ) // VCO gain adjustment resistor
,.vco_cur_adj ( ) // VCO current adjustment
,.vco_buff_en ( ) // VCO buff enable,active high
,.vco_en ( ) // VCO enable,active high
,.vco_fb_adj ( ) // VCO frequency band adjustment
// ,.pll_dpwr_adj ( ) // PLL frequency division output power adjustment
// ,output [7 :0] vco_fb_adj // VCO frequency band adjustment
,.tc_sel ( ) // Temperature compensation options
,.pata_res_en ( ) // PATAMOS resistance enable
,.pata_s_dc_sel ( ) // PATA slope DC selection
,.pata_res_vdc300 ( ) // PATAMOS resistance bias
,.pata_res_vdc500 ( ) // PATAMOS resistance bias
,.pata_res_vdc800 ( ) // PATAMOS resistance bias
,.sw_var_temp_en ( ) // Temperature-compensated automatic switch
,.sw_var_temp ( ) // Temperature-compensated manual switch
,.afc_en ( ) // AFC enable
,.afc_shutdown ( ) // AFC module shutdown signal
,.afc_reset ( ) // AFC reset
//,output [0 :0] afc_det_speed // AFC detection speed
//,output [0 :0] flag_out_sel // Read and choose the signs
,.afc_clk_sel ( ) // AFC clock frequency choose
,.afc_pres ( ) // AFC comparator accuracy adjustment
,.afc_fb_cnt ( ) // AFC frequency band adjustment function counter
,.afc_fb_target ( ) // AFC frequency band adjustment function target number of cycles
,.afc_ld_cnt ( ) // Adjust the counting time of the AFC lock detection // feature counter
,.afc_ld_target ( )// AFC Lock Detection Function Target Cycle Count
,.div_rstn_sel ( ) // div rstn select, 1'b0: ext clear, 1'b1:inter pll lock
,.test_clk_sel ( ) // test clk select, 4'b0001:DIV1 clk, 4'b0010:DIV2 clk, 4'b0100:DIV4 clk, 4'b1000:DIV8 clk
,.test_clk_oen ( ) // test clk output enable, 1'b0:disenable, 1'b1:enable
,.dig_clk_sel ( ) // digital main clk select, one hot code,bit[0]-->0 degree phase,bit[1]-->45 degree phase.....bit[7]-->315degree phae
,.clkrx_pdn ( ) // CLock Rx Power Down
,.sync_clr ( ) // PLL div sync clr,low active
,.pll_rstn ( ) // PLL reset,active low
,.pll_lock ( ) // PLL LOCK
,.afc_end_flag ( )
,.clk_resv ( )
//------------------------------Ch0 DAC cfg pin----------------------------------------------------
,.ch0_dac_addr ()
,.ch0_dac_dw ()
,.ch0_dac_ref ()
,.ch0_dac_Prbs_rst0 ()
,.ch0_dac_Prbs_set0 ()
,.ch0_dac_Prbs_rst1 ()
,.ch0_dac_Prbs_set1 ()
,.ch0_dac_Cal_sig ()
,.ch0_dac_Cal_rstn ()
,.ch0_dac_Cal_div_rstn()
,.ch0_dac_Cal_end (ch0_dac_Cal_end)
,.ch0_dac_Ctrlp ()
,.ch0_dac_Ctrln ()
//------------------------------Ch0 DC Bias cfg pin----------------------------------------------------
,.ch0_dc_addr ()
,.ch0_dc_dw ()
,.ch0_dc_ref ()
,.ch0_dc_Cal_sig ()
,.ch0_dc_Cal_rstn ()
,.ch0_dc_Cal_div_rstn ()
,.ch0_dc_Cal_end (ch0_dc_Cal_end)
,.ch0_dc_clkout ()
`ifdef CHANNEL_IS_FOUR
//------------------------------Ch1 DAC cfg pin----------------------------------------------------
,.ch1_dac_addr ()
,.ch1_dac_dw ()
,.ch1_dac_ref ()
,.ch1_dac_Prbs_rst0 ()
,.ch1_dac_Prbs_set0 ()
,.ch1_dac_Prbs_rst1 ()
,.ch1_dac_Prbs_set1 ()
,.ch1_dac_Cal_sig ()
,.ch1_dac_Cal_rstn ()
,.ch1_dac_Cal_div_rstn()
,.ch1_dac_Cal_end ()
,.ch1_dac_Ctrlp ()
,.ch1_dac_Ctrln ()
//------------------------------Ch1 DC Bias cfg pin----------------------------------------------------
,.ch1_dc_addr ()
,.ch1_dc_dw ()
,.ch1_dc_ref ()
,.ch1_dc_Cal_sig ()
,.ch1_dc_Cal_rstn ()
,.ch1_dc_Cal_div_rstn ()
,.ch1_dc_Cal_end ()
,.ch1_dc_clkout ()
//------------------------------Ch2 DAC cfg pin----------------------------------------------------
,.ch2_dac_addr ()
,.ch2_dac_dw ()
,.ch2_dac_ref ()
,.ch2_dac_Prbs_rst0 ()
,.ch2_dac_Prbs_set0 ()
,.ch2_dac_Prbs_rst1 ()
,.ch2_dac_Prbs_set1 ()
,.ch2_dac_Cal_sig ()
,.ch2_dac_Cal_rstn ()
,.ch2_dac_Cal_div_rstn()
,.ch2_dac_Cal_end ()
,.ch2_dac_Ctrlp ()
,.ch2_dac_Ctrln ()
//------------------------------Ch2 DC Bias cfg pin----------------------------------------------------
,.ch2_dc_addr ()
,.ch2_dc_dw ()
,.ch2_dc_ref ()
,.ch2_dc_Cal_sig ()
,.ch2_dc_Cal_rstn ()
,.ch2_dc_Cal_div_rstn ()
,.ch2_dc_Cal_end ()
,.ch2_dc_clkout ()
//------------------------------Ch3 DAC cfg pin----------------------------------------------------
,.ch3_dac_addr ()
,.ch3_dac_dw ()
,.ch3_dac_ref ()
,.ch3_dac_Prbs_rst0 ()
,.ch3_dac_Prbs_set0 ()
,.ch3_dac_Prbs_rst1 ()
,.ch3_dac_Prbs_set1 ()
,.ch3_dac_Cal_sig ()
,.ch3_dac_Cal_rstn ()
,.ch3_dac_Cal_div_rstn()
,.ch3_dac_Cal_end ()
,.ch3_dac_Ctrlp ()
,.ch3_dac_Ctrln ()
//------------------------------Ch3 DC Bias cfg pin----------------------------------------------------
,.ch3_dc_addr ()
,.ch3_dc_dw ()
,.ch3_dc_ref ()
,.ch3_dc_Cal_sig ()
,.ch3_dc_Cal_rstn ()
,.ch3_dc_Cal_div_rstn ()
,.ch3_dc_Cal_end ()
,.ch3_dc_clkout ()
`endif
`ifdef CHANNEL_Z_ON
//------------------------------Ch0 DSP data out----------------------------------------------------
,.ch0_z_DEM_MSB_OUT0 (ch0_z_DEM_MSB_OUT0)
,.ch0_z_DEM_MSB_OUT1 (ch0_z_DEM_MSB_OUT1)
,.ch0_z_DEM_MSB_OUT2 (ch0_z_DEM_MSB_OUT2)
,.ch0_z_DEM_MSB_OUT3 (ch0_z_DEM_MSB_OUT3)
,.ch0_z_DEM_ISB_OUT0 (ch0_z_DEM_ISB_OUT0)
,.ch0_z_DEM_ISB_OUT1 (ch0_z_DEM_ISB_OUT1)
,.ch0_z_DEM_ISB_OUT2 (ch0_z_DEM_ISB_OUT2)
,.ch0_z_DEM_ISB_OUT3 (ch0_z_DEM_ISB_OUT3)
,.ch0_z_DEM_LSB_OUT0 (ch0_z_DEM_LSB_OUT0)
,.ch0_z_DEM_LSB_OUT1 (ch0_z_DEM_LSB_OUT1)
,.ch0_z_DEM_LSB_OUT2 (ch0_z_DEM_LSB_OUT2)
,.ch0_z_DEM_LSB_OUT3 (ch0_z_DEM_LSB_OUT3)
,.ch0_z_DEM_MSB_vld (ch0_z_DEM_MSB_vld )
,.ch0_dc_bias_o ( )
,.ch0_dc_bias_latch ( )
`endif
`ifdef CHANNEL_IS_FOUR
//------------------------------Ch1 DSP data out----------------------------------------------------
`ifdef CHANNEL_Z_ON
,.ch1_z_DEM_MSB_OUT0 ( )
,.ch1_z_DEM_MSB_OUT1 ( )
,.ch1_z_DEM_MSB_OUT2 ( )
,.ch1_z_DEM_MSB_OUT3 ( )
,.ch1_z_DEM_ISB_OUT0 ( )
,.ch1_z_DEM_ISB_OUT1 ( )
,.ch1_z_DEM_ISB_OUT2 ( )
,.ch1_z_DEM_ISB_OUT3 ( )
,.ch1_z_DEM_LSB_OUT0 ( )
,.ch1_z_DEM_LSB_OUT1 ( )
,.ch1_z_DEM_LSB_OUT2 ( )
,.ch1_z_DEM_LSB_OUT3 ( )
,.ch1_z_DEM_MSB_vld ( )
,.ch1_dc_bias_o ( )
,.ch1_dc_bias_latch ( )
`endif
//------------------------------Ch2 DSP data out----------------------------------------------------
`ifdef CHANNEL_Z_ON
,.ch2_z_DEM_MSB_OUT0 ( )
,.ch2_z_DEM_MSB_OUT1 ( )
,.ch2_z_DEM_MSB_OUT2 ( )
,.ch2_z_DEM_MSB_OUT3 ( )
,.ch2_z_DEM_ISB_OUT0 ( )
,.ch2_z_DEM_ISB_OUT1 ( )
,.ch2_z_DEM_ISB_OUT2 ( )
,.ch2_z_DEM_ISB_OUT3 ( )
,.ch2_z_DEM_LSB_OUT0 ( )
,.ch2_z_DEM_LSB_OUT1 ( )
,.ch2_z_DEM_LSB_OUT2 ( )
,.ch2_z_DEM_LSB_OUT3 ( )
,.ch2_z_DEM_MSB_vld ( )
,.ch2_dc_bias_o ( )
,.ch2_dc_bias_latch ( )
`endif
//------------------------------Ch3 DSP data out----------------------------------------------------
`ifdef CHANNEL_Z_ON
,.ch3_z_DEM_MSB_OUT0 ( )
,.ch3_z_DEM_MSB_OUT1 ( )
,.ch3_z_DEM_MSB_OUT2 ( )
,.ch3_z_DEM_MSB_OUT3 ( )
,.ch3_z_DEM_ISB_OUT0 ( )
,.ch3_z_DEM_ISB_OUT1 ( )
,.ch3_z_DEM_ISB_OUT2 ( )
,.ch3_z_DEM_ISB_OUT3 ( )
,.ch3_z_DEM_LSB_OUT0 ( )
,.ch3_z_DEM_LSB_OUT1 ( )
,.ch3_z_DEM_LSB_OUT2 ( )
,.ch3_z_DEM_LSB_OUT3 ( )
,.ch3_z_DEM_MSB_vld ( )
,.ch3_dc_bias_o ( )
,.ch3_dc_bias_latch ( )
`endif
`endif
//+++++++++++++++++++++++++++++++++++++++++++++//
// PIN END //
//+++++++++++++++++++++++++++++++++++++++++++++//
);
thermo2binary_top Ch0_0_thermo2binary_top (
.clk ( clk )
,.DEM_MSB_IN ( ch0_z_DEM_MSB_OUT0 )
,.DEM_ISB_IN ( ch0_z_DEM_ISB_OUT0 )
,.DEM_LSB_IN ( ch0_z_DEM_LSB_OUT0 )
,.DOUT ( ch0_z_dsp_dout0 )
);
thermo2binary_top Ch0_1_thermo2binary_top (
.clk ( clk )
,.DEM_MSB_IN ( ch0_z_DEM_MSB_OUT1 )
,.DEM_ISB_IN ( ch0_z_DEM_ISB_OUT1 )
,.DEM_LSB_IN ( ch0_z_DEM_LSB_OUT1 )
,.DOUT ( ch0_z_dsp_dout1 )
);
thermo2binary_top Ch0_2_thermo2binary_top (
.clk ( clk )
,.DEM_MSB_IN ( ch0_z_DEM_MSB_OUT2 )
,.DEM_ISB_IN ( ch0_z_DEM_ISB_OUT2 )
,.DEM_LSB_IN ( ch0_z_DEM_LSB_OUT2 )
,.DOUT ( ch0_z_dsp_dout2 )
);
thermo2binary_top Ch0_3_thermo2binary_top (
.clk ( clk )
,.DEM_MSB_IN ( ch0_z_DEM_MSB_OUT3 )
,.DEM_ISB_IN ( ch0_z_DEM_ISB_OUT3 )
,.DEM_LSB_IN ( ch0_z_DEM_LSB_OUT3 )
,.DOUT ( ch0_z_dsp_dout3 )
);
endmodule

251
spi_tx_rx/tx/tx_sram.v Normal file
View File

@ -0,0 +1,251 @@
// Relese History
// Version Date Author Description
// 0.3 2024-05-29 ZYZ
//-----------------------------------------------------------------------------------------------------------------
// Keywords : connect spi-master
//
//-----------------------------------------------------------------------------------------------------------------
// Parameter :
// cmd[31:0] form:
// form-v0.2 {WR ,RSV ,ID ,ADDR}
// [31] [30] [29:25] [24:0]
//
// form-v0.3 {WR ,ADDR ,ID ,RSV}
// [31] [30:6] [5:1] [0]
//
// form-v0.2 is defined by design , it has len[31:0];
// form-v0.3 is produced by spi interface ,it doesn't have len[31:0];
//
// size : 256K
//-----------------------------------------------------------------------------------------------------------------
// Purpose :
//
//-----------------------------------------------------------------------------------------------------------------
// Target Device:
// Tool versions:
//-----------------------------------------------------------------------------------------------------------------
// Reuse Issues
// Reset Strategy:
// Clock Domains:
// Critical Timing:
// Asynchronous I/F:
// Synthesizable (y/n):
// Other:
//-FHDR--------------------------------------------------------------------------------------------------------
module tx_sram(
input clk,
input rstn,
(* mark_debug="true" *)input [31:0] dina,
(* mark_debug="true" *)input [15:0] data_length,
output [31:0] Nlen,
output [4 :0] chip_ID,
output [24:0] address,
output [31:0] data_out,
(* mark_debug="true" *)output wr_en,
(* mark_debug="true" *)output rd_en,
(* mark_debug="true" *)input WREADY,
(* mark_debug="true" *)input RREADY,
output data_done_all,
output data_out_per
);
parameter width = 32 ;
parameter depth = 65536 ;
//=================================================
function integer clog2(input integer depth);
begin
for(clog2=0;depth>0;clog2=clog2+1)
depth =depth>>1;
end
endfunction
//=================================================
localparam aw = clog2(depth-1);
//=================================================
//wr&rd address
(* mark_debug="true" *) reg [aw-1:0]cnta ;
(* mark_debug="true" *) reg [aw-1:0]cntb ;
(* mark_debug="true" *) wire ena ;
(* mark_debug="true" *) wire enb ;
(* mark_debug="true" *) wire full ;
(* mark_debug="true" *) wire [31:0] doutb;
//current len of data ,initial value is 0
(* mark_debug="true" *) reg [31:0]len_current ;
//cmd
(* mark_debug="true" *) reg cmd_s ;
(* mark_debug="true" *) reg [4:0] chip_ID_reg ;
(* mark_debug="true" *)reg [24:0]address_reg ;
always@(posedge clk or negedge rstn)begin
if(!rstn)begin
cmd_s <= 1'b0;
chip_ID_reg <= 5'b0;
address_reg <= 25'b0;
end
else if(cntb == len_current + 2'd1)begin
cmd_s <= doutb[31];
chip_ID_reg <= doutb[5:1];
address_reg <= doutb[30:6];
end
else begin
cmd_s <= cmd_s;
chip_ID_reg <= chip_ID_reg;
address_reg <= address_reg;
end
end
assign chip_ID = chip_ID_reg;
assign address = address_reg;
//len of data_out
(* mark_debug="true" *) reg [31:0]len_reg ;
always@(posedge clk or negedge rstn)begin
if(!rstn)begin
len_reg <= 32'b0;
end
else if(cntb == len_current + 2'd2)begin
len_reg <= doutb ;
end
else begin
len_reg <= len_reg;
end
end
assign Nlen = len_reg;
//data_out
(* mark_debug="true" *) reg [31:0]data_out_reg ;
(* mark_debug="true" *) wire data_out_en ;
always@(posedge clk or negedge rstn)begin
if(!rstn)begin
data_out_reg <= 32'b0;
end
else if(data_out_en)begin
data_out_reg <= doutb ;
end
else begin
data_out_reg <= 32'b0;
end
end
reg data_out_en_r1;
always@(posedge clk or negedge rstn)begin
if(!rstn)begin
data_out_en_r1 <= 1'b0;
end
else begin
data_out_en_r1 <= data_out_en;
end
end
assign data_out = data_out_reg;
assign data_out_en = (cntb >= len_current + 2'd3) & (cntb <= len_current + len_reg + 2'd2);
//signal send to spi_master
assign wr_en = !cmd_s & data_out_en_r1;
assign rd_en = cmd_s & data_out_en_r1;
//signal send to PC
assign data_out_per = (cntb == len_current + 3'd3 ) ? 1'b1 : 1'b0;
assign data_done_all = (cntb == data_length-1'b1 | cnta == data_length - 1'b1) ? 1'b1 : 1'b0;
//the time ready for writing data and updata len_current
reg [2:0] wready_reg;
always @(posedge clk or negedge rstn)
begin
if(!rstn ) begin
wready_reg <= 3'b0;
end
else begin
wready_reg <= {wready_reg[1:0],WREADY};
end
end
assign wready_posedge = wready_reg[1:0] == 2'b01 ? 1'b1 : 1'b0;
//updata len_current and cntb
always@(posedge clk or negedge rstn)begin
if(!rstn)begin
len_current <= 32'b0;
end
else if( wready_posedge & len_reg != 0)begin
len_current <= len_current + len_reg + 2'd2 ;
end
else begin
len_current <= len_current;
end
end
//write address: addra
//read address: addrb
always @(posedge clk or negedge rstn)
begin
if(!rstn) begin
cnta <= 'hffff;
end
else if(ena) begin
cnta <= cnta + 1'b1;
end
else
cnta <= cnta ;
end
always @(posedge clk or negedge rstn)
begin
if(!rstn ) begin
cntb <= 'h0 ;
end
else if(enb) begin
cntb <= cntb + 1'b1;
end
else if(wready_posedge & len_reg != 0) begin
cntb <= cntb - 1'b1 ; // better solution?
end
else begin
cntb <= cntb;
end
end
assign full = (cnta+1'b1 <= data_length )? 1'b0 : 1'b1 ;
assign ena = !full;
assign enb = full & (cntb <= data_length ) & WREADY & (cntb <= len_current + len_reg + 2'd2);
/*
blk_mem_gen_0 blk_mem_gen_0_inst(
.clka(clk),
.ena(1'b1),
.wea(ena),
.dina(dina),
.addra(cnta),
.clkb(clk),
.enb(enb),
.doutb(doutb),
.addrb(cntb)
);
*/
spram_model #(
.width(width),
.depth(depth)
)spram_inst(
.clka(clk),
.ena(~ena),
.dina(dina),
.addra(cnta),
.clkb(clk),
.enb(~enb),
.doutb(doutb),
.addrb(cntb)
);
endmodule