SPI_Test/rtl/top/channel_top.sv

634 lines
40 KiB
Systemverilog

//+FHDR--------------------------------------------------------------------------------------------------------
// Company:
//-----------------------------------------------------------------------------------------------------------------
// File Name : channel_top.v
// Department :
// Author : pwy
// Author's Tel :
//-----------------------------------------------------------------------------------------------------------------
// Relese History
// Version Date Author Description
// 1.2 2024-04-16 pwy XYZ channel the top-level module
//-----------------------------------------------------------------------------------------------------------------
// Keywords :
//
//-----------------------------------------------------------------------------------------------------------------
// Parameter
//
//-----------------------------------------------------------------------------------------------------------------
// Purpose :
//
//-----------------------------------------------------------------------------------------------------------------
// Target Device:
// Tool versions:
//-----------------------------------------------------------------------------------------------------------------
// Reuse Issues
// Reset Strategy:
// Clock Domains:
// Critical Timing:
// Asynchronous I/F:
// Synthesizable (y/n):
// Other:
//-FHDR------------------------------------------------------------------------------------------------------------
`include "../define/chip_define.v"
`include "../qubitmcu/qbmcu_defines.v"
module channel_top (
//system port
input clk
,input rst_n
//Sync Start
,input sync_int
//Decoded port
,output dec_o_ilegl
//Misaligned memory address
,output agu_o_addr_unalgn
//
,output awg_proc_cft
,output mcu_ext_o_intr
//Feedback signal from the readout chip
,input [1 :0] fb_st_in
//ITCM
,input [`QBMCU_DTCM_ADDR_SIZE-1 :0] itcm_i_rwaddr
,input [`QBMCU_XLEN-1 :0] itcm_i_wrdata
,input itcm_i_wren
,input [`QBMCU_XLEN/8-1 :0] itcm_i_wrmask
,input itcm_i_rden
,output [`QBMCU_XLEN-1 :0] itcm_o_rddata
//DTCM
,input [`QBMCU_DTCM_ADDR_SIZE-1 :0] dtcm_i_rwaddr
,input [`QBMCU_XLEN-1 :0] dtcm_i_wrdata
,input dtcm_i_wren
,input [`QBMCU_XLEN/8-1 :0] dtcm_i_wrmask
,input dtcm_i_rden
,output [`QBMCU_XLEN-1 :0] dtcm_o_rddata
//ctrl regfile
,input [31 :0] ctrl_wrdata
,input ctrl_wren
,input [15 :0] ctrl_rwaddr
,input ctrl_rden
,output [31 :0] ctrl_rddata
//Envelope storage read/write signal
,input [31 :0] enve_bwrdata
,input [0 :0] enve_bwren
,input [14 :0] enve_brwaddr
,input [0 :0] enve_brden
,output [31 :0] enve_brddata
//envelope index lookup table read-write signal
,input [31 :0] enve_id_bwrdata
,input [0 :0] enve_id_bwren
,input [7 :0] enve_id_brwaddr
,input [0 :0] enve_id_brden
,output [31 :0] enve_id_brddata
//DAC cfg
//dac regfile
,input [31 :0] dac_wrdata
,input dac_wren
,input [15 :0] dac_rwaddr
,input dac_rden
,output [31 :0] dac_rddata
,output dac_Prbs
,output [14 :0] dac_Set0
,output [14 :0] dac_Set1
,output [14 :0] dac_Set2
,output [14 :0] dac_Set3
,output [14 :0] dac_Set4
,output [14 :0] dac_Set5
,output [14 :0] dac_Set6
,output [14 :0] dac_Set7
,output [14 :0] dac_Set8
,output [14 :0] dac_Set9
,output [14 :0] dac_Set10
,output [14 :0] dac_Set11
,output [14 :0] dac_Set12
,output [14 :0] dac_Set13
,output [14 :0] dac_Set14
,output [14 :0] dac_Set15
,output [2 :0] dac_addr
,output [2 :0] dac_dw
,output [8 :0] dac_ref
,output [16 :0] dac_Prbs_rst0
,output [16 :0] dac_Prbs_set0
,output [16 :0] dac_Prbs_rst1
,output [16 :0] dac_Prbs_set1
,output dac_Cal_sig
,output dac_Cal_rstn
,output Cal_div_rstn
,input dac_Cal_end
//awg data output
,output [15 :0] awg_data_i_o
,output [15 :0] awg_data_q_o
,output awg_vld_o
`ifdef CHANNEL_XY_ON
//dsp data output
,output [15 :0] xy_dsp_dout0
,output [15 :0] xy_dsp_dout1
,output [15 :0] xy_dsp_dout2
,output [15 :0] xy_dsp_dout3
,output [15 :0] xy_dsp_dout4
,output [15 :0] xy_dsp_dout5
,output [15 :0] xy_dsp_dout6
,output [15 :0] xy_dsp_dout7
,output [15 :0] xy_dsp_dout8
,output [15 :0] xy_dsp_dout9
,output [15 :0] xy_dsp_dout10
,output [15 :0] xy_dsp_dout11
,output [15 :0] xy_dsp_dout12
,output [15 :0] xy_dsp_dout13
,output [15 :0] xy_dsp_dout14
,output [15 :0] xy_dsp_dout15
,output xy_dsp_dout_vld
`endif
`ifdef CHANNEL_Z_ON
//Z dsp output
,output [15 :0] z_dsp_dout0
,output [15 :0] z_dsp_dout1
,output [15 :0] z_dsp_dout2
,output [15 :0] z_dsp_dout3
`endif
);
//---------------------------------------------------------------------------------------------
// qbmcu instantiation start
//---------------------------------------------------------------------------------------------
wire [`QBMCU_PC_SIZE-1 :0] ifu_i_pc_rtvec = 32'h0 ;
wire [`QBMCU_PC_SIZE-1 :0] ifu_o_req_pc ;
wire ifu_o_req ;
wire [`QBMCU_INSTR_SIZE-1:0] ifu_rsp_instr ;
wire [`QBMCU_ADDR_SIZE-1 :0] agu_o_addr ;
wire [`QBMCU_XLEN-1 :0] agu_o_wrdata ;
wire agu_o_wren ;
wire [`QBMCU_XLEN/8-1 :0] agu_o_wrmask ;
wire agu_o_rden ;
wire [`QBMCU_XLEN-1 :0] agu_i_rddata ;
wire ext_o_send ;
wire ext_o_sendc ;
wire [`QBMCU_XLEN-1 :0] ext_o_codeword ;
wire [2 :0] qbmcu_o_fsm_st ;
qbmcu U_qbmcu (
.clk ( clk )
,.rst_n ( rst_n )
,.qbmcu_i_start ( sync_int )
,.qbmcu_o_fsm_st ( qbmcu_o_fsm_st )
,.ifu_i_pc_rtvec ( ifu_i_pc_rtvec )
,.ifu_o_req_pc ( ifu_o_req_pc )
,.ifu_o_req ( ifu_o_req )
,.ifu_rsp_instr ( ifu_rsp_instr )
,.dec_o_ilegl ( dec_o_ilegl )
,.agu_o_addr ( agu_o_addr )
,.agu_o_wrdata ( agu_o_wrdata )
,.agu_o_wren ( agu_o_wren )
,.agu_o_wrmask ( agu_o_wrmask )
,.agu_o_rden ( agu_o_rden )
,.agu_i_rddata ( agu_i_rddata )
,.agu_o_addr_unalgn ( agu_o_addr_unalgn )
,.ext_o_send ( ext_o_send )
,.ext_o_sendc ( ext_o_sendc )
,.ext_o_codeword ( ext_o_codeword )
,.ext_o_intr ( mcu_ext_o_intr )
);
//---------------------------------------------------------------------------------------------
// qbmcu instantiation end
//---------------------------------------------------------------------------------------------
//---------------------------------------------------------------------------------------------
// MCU runtime counter instantiation start
//---------------------------------------------------------------------------------------------
defparam qbmcu_runtime.width = 32;
//MCU runtime
wire [31 :0] run_time ;
DW03_updn_ctr qbmcu_runtime (
.clk ( clk ) // clock input
,.reset ( rst_n ) // asynchronous reset input (active low)
,.data ( 32'd0 ) // data used for load operation
,.up_dn ( 1'b1 ) // up/down control input (0=down, 1-up)
,.load ( ~sync_int ) // load operation control input (active low)
,.cen ( |qbmcu_o_fsm_st ) // count enable control input (active high enable)
,.count ( run_time ) // count value output
,.tercnt ( ) // terminal count output flag (active high)
);
//---------------------------------------------------------------------------------------------
// MCU runtime counter instantiation end
//---------------------------------------------------------------------------------------------
//---------------------------------------------------------------------------------------------
// fetch instructions number counter instantiation start
//---------------------------------------------------------------------------------------------
defparam instrnum.width = 32;
//Count the number of fetch instructions
wire [31 :0] instr_num ;
DW03_updn_ctr instrnum (
.clk ( clk ) // clock input
,.reset ( rst_n ) // asynchronous reset input (active low)
,.data ( 32'd0 ) // data used for load operation
,.up_dn ( 1'b1 ) // up/down control input (0=down, 1-up)
,.load ( ~sync_int ) // load operation control input (active low)
,.cen ( ifu_o_req ) // count enable control input (active high enable)
,.count ( instr_num ) // count value output
,.tercnt ( ) // terminal count output flag (active high)
);
//---------------------------------------------------------------------------------------------
// fetch instructions number counter instantiation end
//---------------------------------------------------------------------------------------------
//---------------------------------------------------------------------------------------------
// qbmcu_busdecoder instantiation start
//---------------------------------------------------------------------------------------------
wire [`QBMCU_ADDR_SIZE-1 :0] dsram_o_rwaddr ;
wire [`QBMCU_XLEN-1 :0] dsram_o_wrdata ;
wire dsram_o_wren ;
wire [`QBMCU_XLEN/8-1 :0] dsram_o_wrmask ;
wire dsram_o_rden ;
wire [`QBMCU_XLEN-1 :0] dsram_i_rddata ;
wire [`QBMCU_ADDR_SIZE-1 :0] preg_o_rwaddr ;
wire [`QBMCU_XLEN-1 :0] preg_o_wrdata ;
wire preg_o_wren ;
wire [`QBMCU_XLEN/8-1 :0] preg_o_wrmask ;
wire preg_o_rden ;
wire [`QBMCU_XLEN-1 :0] preg_i_rddata ;
qbmcu_busdecoder #(
.S0_BASEADDR ( 32'h0010_0000 )
,.S1_BASEADDR ( 32'h0020_0000 )
)U_qbmcu_busdecoder (
.wren ( agu_o_wren )
,.wrmask ( agu_o_wrmask )
,.wrdata ( agu_o_wrdata )
,.rwaddr ( agu_o_addr )
,.rden ( agu_o_rden )
,.rddata ( agu_i_rddata )
,.s0_wren ( dsram_o_wren )
,.s0_wrmask ( dsram_o_wrmask )
,.s0_rwaddr ( dsram_o_rwaddr )
,.s0_wrdata ( dsram_o_wrdata )
,.s0_rden ( dsram_o_rden )
,.s0_rddata ( dsram_i_rddata )
,.s1_wren ( preg_o_wren )
,.s1_wrmask ( preg_o_wrmask )
,.s1_rwaddr ( preg_o_rwaddr )
,.s1_wrdata ( preg_o_wrdata )
,.s1_rden ( preg_o_rden )
,.s1_rddata ( preg_i_rddata )
);
//---------------------------------------------------------------------------------------------
// qbmcu_busdecoder instantiation end
//---------------------------------------------------------------------------------------------
//---------------------------------------------------------------------------------------------
// mcu_regfile instantiation start
//---------------------------------------------------------------------------------------------
//MCU and SPI interface for interaction
wire [31 :0] mcu_param [3:0] ; // MCU parameter 0~3
wire [31 :0] mcu_result [3:0] ; // MCU result 0~3
//lookup table data ;
wire [31 :0] mcu_cwfr [3:0] ; // Carrier frequency ctrl word 0~3
wire [15 :0] mcu_gapr [7:0] ; // Carrier phase ctrl word 0~3
wire [15 :0] mcu_ampr [3:0] ; // Carrier Amplitude 0~3
wire [15 :0] mcu_baisr [3:0] ; // Carrier Bais 0~3
//CFG Port
wire mcu_nco_pha_clr ;
wire [15 :0] mcu_rz_pha ;
wire [1:0] fb_st_in_s;
syncer #(2, 2) fb_st_in_syncer (clk, rst_n, fb_st_in, fb_st_in_s);
mcu_regfile U_mcu_regfile (
.clk ( clk )
,.rst_n ( rst_n )
,.rwaddr ( preg_o_rwaddr[15:0] )
,.wrdata ( preg_o_wrdata )
,.wren ( preg_o_wren )
,.wrmask ( preg_o_wrmask )
,.rden ( preg_o_rden )
,.rddata ( preg_i_rddata )
,.fb_st_info ( fb_st_in_s )
,.run_time ( run_time )
,.instr_num ( instr_num )
,.mcu_param ( mcu_param )
,.mcu_result ( mcu_result )
,.mcu_cwfr ( mcu_cwfr )
,.mcu_gapr ( mcu_gapr )
,.mcu_ampr ( mcu_ampr )
,.mcu_baisr ( mcu_baisr )
,.mcu_nco_pha_clr ( mcu_nco_pha_clr )
,.mcu_rz_pha ( mcu_rz_pha )
);
//---------------------------------------------------------------------------------------------
// mcu_regfile instantiation end
//---------------------------------------------------------------------------------------------
//---------------------------------------------------------------------------------------------
// U_ITCM instantiation start
//---------------------------------------------------------------------------------------------
wire itcm_portb_wen = ~itcm_i_wren & itcm_i_rden;
wire itcm_portb_cen = ~(itcm_i_wren | itcm_i_rden);
dpram #(
.DATAWIDTH ( 32 )
,.ADDRWIDTH ( 15 )
) U_ITCM (
.PortClk ( clk )
,.PortAAddr ( ifu_o_req_pc[`QBMCU_ITCM_ADDR_SIZE-1:0] )
,.PortADataIn ( 32'b0 )
,.PortAWriteEnable ( 1'b1 )
,.PortAChipEnable ( ~ifu_o_req )
,.PortAByteWriteEnable ( 4'b0 )
,.PortADataOut ( ifu_rsp_instr )
,.PortBAddr ( itcm_i_rwaddr[14:0] )
,.PortBDataIn ( itcm_i_wrdata )
,.PortBWriteEnable ( itcm_portb_wen )
,.PortBChipEnable ( itcm_portb_cen )
,.PortBByteWriteEnable ( itcm_i_wrmask )
,.PortBDataOut ( itcm_o_rddata )
);
//---------------------------------------------------------------------------------------------
// U_ITCM instantiation end
//---------------------------------------------------------------------------------------------
////////////////////////////////////////////////////////////////////////////////////////////////////////////
//DTCM
////////////////////////////////////////////////////////////////////////////////////////////////////////////
wire dtcm_portb_wen = ~dtcm_i_wren & dtcm_i_rden;
wire dtcm_portb_cen = ~(dtcm_i_wren | dtcm_i_rden);
dpram #(
.DATAWIDTH ( 32 )
,.ADDRWIDTH ( 15 )
) U_DTCM (
.PortClk ( clk )
,.PortAAddr ( dsram_o_rwaddr[`QBMCU_DTCM_ADDR_SIZE-1:0] )
,.PortADataIn ( dsram_o_wrdata )
,.PortAWriteEnable ( ~dsram_o_wren )
,.PortAChipEnable ( ~(dsram_o_rden | dsram_o_wren) )
,.PortAByteWriteEnable ( ~dsram_o_wrmask )
,.PortADataOut ( dsram_i_rddata )
,.PortBAddr ( dtcm_i_rwaddr[14:0] )
,.PortBDataIn ( dtcm_i_wrdata )
,.PortBWriteEnable ( dtcm_portb_wen )
,.PortBChipEnable ( dtcm_portb_cen )
,.PortBByteWriteEnable ( dtcm_i_wrmask )
,.PortBDataOut ( dtcm_o_rddata )
);
//---------------------------------------------------------------------------------------------
// ctrl_regfile instantiation start
//---------------------------------------------------------------------------------------------
wire [1 :0] fb_st_int ;
//awg cfg
wire mod_sel_sideband ;
//DSP cfg
wire qam_nco_sclr_en ;
wire qam_nco_clr ;
wire [47 :0] qam_fcw ;
wire [15 :0] qam_pha ;
wire [1 :0] qam_mod ;
wire qam_sel_sideband ;
wire [2 :0] intp_mode ;
wire [1 :0] role_sel ;
wire [1 :0] dac_mode_sel ;
wire enve_read_fsm_st ;
wire bais_i_ov ;
wire bais_q_ov ;
wire dout_sel ;
wire dsp_alwayson ;
wire mod_dout_sel = dout_sel ;
ctrl_regfile U_ctrl_regfile (
.clk ( clk )
,.rst_n ( rst_n )
,.wrdata ( ctrl_wrdata )
,.wren ( ctrl_wren )
,.rwaddr ( ctrl_rwaddr )
,.rden ( ctrl_rden )
,.rddata ( ctrl_rddata )
,.fb_st_i ( fb_st_in_s )
,.run_time ( run_time )
,.instr_num ( instr_num )
,.bais_i_ov ( bais_i_ov )
,.bais_q_ov ( bais_q_ov )
,.awg_ctrl_fsm_st ( enve_read_fsm_st )
,.mcu_param0 ( mcu_param[0] )
,.mcu_param1 ( mcu_param[1] )
,.mcu_param2 ( mcu_param[2] )
,.mcu_param3 ( mcu_param[3] )
,.mcu_result0 ( mcu_result[0] )
,.mcu_result1 ( mcu_result[1] )
,.mcu_result2 ( mcu_result[2] )
,.mcu_result3 ( mcu_result[3] )
,.fb_st_o ( fb_st_int )
,.mod_sel_sideband ( mod_sel_sideband )
,.qam_nco_clr ( qam_nco_clr )
,.qam_nco_sclr_en ( qam_nco_sclr_en )
,.qam_fcw ( qam_fcw )
,.qam_pha ( qam_pha )
,.qam_mod ( qam_mod )
,.qam_sel_sideband ( qam_sel_sideband )
,.intp_mode ( intp_mode )
,.role_sel ( role_sel )
,.dout_sel ( dout_sel )
,.dac_mode_sel ( dac_mode_sel )
,.dsp_alwayson ( dsp_alwayson )
);
//---------------------------------------------------------------------------------------------
// ctrl_regfile instantiation end
//---------------------------------------------------------------------------------------------
//---------------------------------------------------------------------------------------------
// awg_top instantiation start
//---------------------------------------------------------------------------------------------
wire [15 :0] awg_data_i ;
wire [15 :0] awg_data_q ;
wire awg_vld ;
wire mod_pha_sfot_clr = ~rst_n;
assign awg_data_i_o = awg_data_i ;
assign awg_data_q_o = awg_data_q ;
assign awg_vld_o = awg_vld ;
awg_top U_awg_top (
.clk ( clk )
,.rst_n ( rst_n )
,.mcu_cwfr ( mcu_cwfr )
,.mcu_gapr ( mcu_gapr )
,.mcu_ampr ( mcu_ampr )
,.mcu_baisr ( mcu_baisr )
,.mcu_nco_pha_clr ( mcu_nco_pha_clr )
,.mcu_rz_pha ( mcu_rz_pha )
,.send ( ext_o_send )
,.sendc ( ext_o_sendc )
,.codeword ( ext_o_codeword )
,.fb_st ( fb_st_int )
,.enve_bwrdata ( enve_bwrdata )
,.enve_bwren ( enve_bwren )
,.enve_brwaddr ( enve_brwaddr )
,.enve_brden ( enve_brden )
,.enve_brddata ( enve_brddata )
,.enve_id_bwrdata ( enve_id_bwrdata )
,.enve_id_bwren ( enve_id_bwren )
,.enve_id_brwaddr ( enve_id_brwaddr )
,.enve_id_brden ( enve_id_brden )
,.enve_id_brddata ( enve_id_brddata )
,.enve_read_fsm_st ( enve_read_fsm_st )
,.proc_cft ( awg_proc_cft )
,.mod_sideband_sel ( mod_sel_sideband )
,.mod_pha_sfot_clr ( mod_pha_sfot_clr )
,.role_sel ( role_sel )
,.mod_dout_sel ( mod_dout_sel )
,.awg_data_i ( awg_data_i )
,.awg_data_q ( awg_data_q )
,.awg_vld ( awg_vld )
,.bais_i_ov ( bais_i_ov )
,.bais_q_ov ( bais_q_ov )
);
//---------------------------------------------------------------------------------------------
// awg_top instantiation end
//---------------------------------------------------------------------------------------------
`ifdef CHANNEL_XY_ON
//---------------------------------------------------------------------------------------------
// xy's dsp instantiation start
//---------------------------------------------------------------------------------------------
wire qam_anco_clr = qam_nco_sclr_en ? ~sync_int : 1'b0;
wire mix_enable = ~(role_sel[1]);
xy_dsp U_xy_dsp (
.clk ( clk )
,.rstn ( rst_n )
,.phase_manual_clr ( qam_nco_clr )
,.phase_auto_clr ( qam_anco_clr )
,.fcw ( qam_fcw )
,.pha ( qam_pha )
,.qam_mod ( qam_mod )
,.sel_sideband ( qam_sel_sideband )
,.intp_mode ( intp_mode )
,.dac_mode_sel ( dac_mode_sel )
,.mix_enable ( mix_enable )
,.dsp_alwayson ( dsp_alwayson )
,.din_i ( awg_data_i )
,.din_q ( awg_data_q )
,.din_vld ( awg_vld )
,.dout0 ( xy_dsp_dout0 )
,.dout1 ( xy_dsp_dout1 )
,.dout2 ( xy_dsp_dout2 )
,.dout3 ( xy_dsp_dout3 )
,.dout4 ( xy_dsp_dout4 )
,.dout5 ( xy_dsp_dout5 )
,.dout6 ( xy_dsp_dout6 )
,.dout7 ( xy_dsp_dout7 )
,.dout8 ( xy_dsp_dout8 )
,.dout9 ( xy_dsp_dout9 )
,.dout10 ( xy_dsp_dout10 )
,.dout11 ( xy_dsp_dout11 )
,.dout12 ( xy_dsp_dout12 )
,.dout13 ( xy_dsp_dout13 )
,.dout14 ( xy_dsp_dout14 )
,.dout15 ( xy_dsp_dout15 )
,.dout_vld ( xy_dsp_dout_vld )
);
//---------------------------------------------------------------------------------------------
// xy's dsp instantiation end
//---------------------------------------------------------------------------------------------
`endif
`ifdef CHANNEL_Z_ON
//---------------------------------------------------------------------------------------------
// z_data_mux instantiation start
//---------------------------------------------------------------------------------------------
wire z_dout_sel = dout_sel;
wire [15:0] z_dsp_data0 = 16'h0000;
wire [15:0] z_dsp_data1 = 16'h0000;
wire [15:0] z_dsp_data2 = 16'h0000;
wire [15:0] z_dsp_data3 = 16'h0000;
z_data_mux U_z_data_mux (
.clk ( clk )
,.rst_n ( rst_n )
,.sel ( z_dout_sel )
,.z_dsp_data0 ( z_dsp_data0 )
,.z_dsp_data1 ( z_dsp_data1 )
,.z_dsp_data2 ( z_dsp_data2 )
,.z_dsp_data3 ( z_dsp_data3 )
,.xy_dsp_data0 ( xy_dsp_dout0 )
,.xy_dsp_data1 ( xy_dsp_dout1 )
,.xy_dsp_data2 ( xy_dsp_dout2 )
,.xy_dsp_data3 ( xy_dsp_dout3 )
,.mux_data_0 ( z_dsp_dout0 )
,.mux_data_1 ( z_dsp_dout1 )
,.mux_data_2 ( z_dsp_dout2 )
,.mux_data_3 ( z_dsp_dout3 )
);
//---------------------------------------------------------------------------------------------
// z_data_mux instantiation end
//---------------------------------------------------------------------------------------------
`endif
//---------------------------------------------------------------------------------------------
//dac_regfile instantiation start
//---------------------------------------------------------------------------------------------
dac_regfile U_ch0_dac_regfile (
.clk ( clk )
,.rstn ( rst_n )
,.wrdata ( dac_wrdata )
,.wren ( dac_wren )
,.rwaddr ( dac_rwaddr )
,.rden ( dac_rden )
,.rddata ( dac_rddata )
,.Prbs ( dac_Prbs )
,.Set0 ( dac_Set0 )
,.Set1 ( dac_Set1 )
,.Set2 ( dac_Set2 )
,.Set3 ( dac_Set3 )
,.Set4 ( dac_Set4 )
,.Set5 ( dac_Set5 )
,.Set6 ( dac_Set6 )
,.Set7 ( dac_Set7 )
,.Set8 ( dac_Set8 )
,.Set9 ( dac_Set9 )
,.Set10 ( dac_Set10 )
,.Set11 ( dac_Set11 )
,.Set12 ( dac_Set12 )
,.Set13 ( dac_Set13 )
,.Set14 ( dac_Set14 )
,.Set15 ( dac_Set15 )
,.Dac_addr ( dac_addr )
,.Dac_dw ( dac_dw )
,.Dac_ref ( dac_ref )
,.Prbs_rst0 ( dac_Prbs_rst0 )
,.Prbs_set0 ( dac_Prbs_set0 )
,.Prbs_rst1 ( dac_Prbs_rst1 )
,.Prbs_set1 ( dac_Prbs_set1 )
,.Cal_sig ( dac_Cal_sig )
,.Cal_end ( dac_Cal_end )
,.Cal_rstn ( dac_Cal_rstn )
,.Cal_div_rstn ( Cal_div_rstn )
);
endmodule
`include "../define/chip_undefine.v"
`include "../qubitmcu/qbmcu_undefines.v"